Hotpoint Washing Machine WMYF 862P Manual

The Hotpoint WMYF 862P is a freestanding front-loading washing machine with an 8kg capacity, 1400 RPM spin speed, energy efficiency class A+++, and multiple wash programs. It features Hotpoint's AquaCare technology for reduced water consumption, Anti-Stain system for tough stains, Direct Spray for even detergent distribution, and a delay timer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary selector and digital display, detergent drawer, door with safety lock, drain pump filter, adjustable feet, water inlet hoses.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Position the machine: Ensure at least 1 cm space from walls and furniture. Adjust feet for stability.
2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Do not overtighten.
3. Connect drain hose: Place in standpipe (min height 60 cm, max 100 cm) or secure over sink edge.
4. Plug into a grounded 220-240V AC power outlet.

WARNING! Remove all transit bolts before use. Failure to do so will cause severe damage. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an initial maintenance wash.

1. Power on the machine: Press the power button.
2. Run a drum clean cycle: Select the "Drum Clean" program (or a 90°C cotton cycle without laundry) to remove residues.
3. Set preferences: Use the control dial and buttons to set language, acoustic signals, and default options.
4. Load detergent: Fill compartments I (pre-wash), II (main wash), and * (fabric softener) as needed.

CAUTION! Do not load laundry during the first maintenance wash. Use only recommended detergents.

Specifications

• Model: WMYF 862P
• Type: Freestanding Front Loader
• Capacity: 8 kg
• Max Spin Speed: 1400 RPM
• Energy Rating: A+++
• Water Consumption: Approx. 52 liters per cycle (cotton 60°C)
• Noise Level: Washing: 53 dB, Spinning: 73 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Weight: 70 kg
• Power Supply: 220-240V AC, 50Hz
• Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, Anti-Stain, Drum Clean, etc.

Controls and Settings

Control Panel: Rotary dial (program selection), Digital display (time, settings), Buttons (Start/Pause, Delay, Options, Spin Speed, Temperature).

Program Dial: Select from Cotton, Eco Cotton, Synthetics, Delicates, Wool, Silk, Quick Wash (30'), Anti-Stain, Sportswear, Jeans, Drum Clean, Rinse & Spin, Spin Only.

Options: Delay Start (1-24h), Extra Rinse, Pre-Wash, Anti-Crease, Speed Wash (reduces time). Settings: Spin speed adjustment (0-1400 RPM), Temperature selection (Cold to 90°C). Display: Shows remaining time, selected options, and error codes.

Connecting Utilities

Water: Cold fill (mandatory), Hot fill (optional). Drain: Standpipe or sink. Power: Grounded socket.

1. Ensure water taps are off before connecting hoses.
2. Use only new hoses supplied; do not reuse old ones.
3. Check drain hose is not kinked and is securely placed.
4. Plug directly into wall socket; do not use extension cords.

Tip: A leak detection tray is recommended for installation under the appliance.

Using Wash Programs

Select program based on fabric type and soil level.

1. Sort laundry: Separate by color, fabric, and care labels.
2. Load machine: Do not overload; distribute items evenly.
3. Add detergent: Use compartment II for main wash. Use liquid detergent drawer if applicable.
4. Select program: Turn dial (e.g., Cotton for towels/bed linen).
5. Adjust settings: Set temperature and spin speed if needed.
6. Add options: Press Extra Rinse, Delay, etc.
7. Start: Press Start/Pause. The door locks and cycle begins.
8. End of cycle: Acoustic signal sounds. Door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open the door during a wash cycle. Wait for the door lock symbol to disappear.

Special Functions

Anti-Stain: Select the program and choose the stain type via the display (Wine, Grass, Mud, Oil, etc.). Delay Timer: Set start time (1-24 hours). Child Lock: Press and hold Delay and Option buttons for 3 seconds to activate/deactivate. Allergy Care: Adds an extra rinse and higher temperature rinse to reduce allergens.

Care & Cleaning

Unplug before maintenance. Regularly clean detergent drawer, door seal, and drum.

1. Detergent drawer: Pull out, rinse under warm water, dry, and reinsert.
2. Door seal: Wipe clean and dry to prevent mold. Check for foreign objects.
3. Drum: Run "Drum Clean" program monthly (or 90°C cotton cycle without laundry).
4. Drain filter: Clean every 2-3 months. Place towel below, open filter cover, drain residual water, remove debris.
5. Exterior: Wipe with a damp cloth; do not use abrasive cleaners.

CAUTION! Never use harsh chemicals, solvents, or steam cleaners on the appliance.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). The symbol on the product or packaging indicates that this product must not be disposed of with normal household waste. Contact your local authority for recycling information. For support, visit www.hotpoint.eu or contact the Hotpoint customer service line specific to your country.

Troubleshooting

Reset: Unplug the machine for 5 minutes to reset the electronic control.

Service: For repairs, contact authorized Hotpoint service. Always quote model number WMYF 862P.