Hotpoint washing machine WMXTF 942P UK.R manual

The Hotpoint WMXTF 942P UK.R is a freestanding washing machine with a 9kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features Hotpoint's Anti-Stain technology for improved cleaning, a direct injection motor for efficiency and quiet operation, a large porthole door, and multiple wash programs including a 15-minute fast wash. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent dispenser, large porthole door, direct injection motor, Anti-Stain technology, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Position the machine: Ensure adequate space for ventilation and door opening.
2. Adjust feet: Use a spanner to level the machine; check with a spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure washers are fitted.
4. Connect drain hose: Place hose into standpipe or sink, secure with provided hook if needed.
5. Plug into a grounded 220-240V AC power outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure all connections are secure to prevent leaks.

First-Time Setup

After installation, run an initial maintenance wash.

1. Power on the machine: Press the power button.
2. Run a cleaning cycle: Select the "Drum Clean" or "Maintenance" program without laundry and run at 90°C.
3. Set preferences: Use the control dial and buttons to set clock time, default spin speed, and temperature if desired.
4. Load detergent: Fill the detergent dispenser compartments as per instructions for your first wash.

CAUTION! Ensure the machine is level to prevent excessive vibration and noise during spin cycles.

Specifications

• Model: WMXTF 942P UK.R
• Type: Freestanding Front-Loading Washing Machine
• Capacity: 9 kg
• Max Spin Speed: 1400 RPM
• Energy Rating: A+++
• Water Consumption: Approx. 50 litres per cycle (standard cotton 60°C)
• Noise Level (Wash/Spin): 53 dB / 75 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Weight: 70 kg
• Power Supply: 220-240V, 50Hz, 10A
• Programs: Cotton, Synthetic, Delicates, Wool, Anti-Stain, Fast 15', Drum Clean, etc.

Controls and Settings

Access functions via the rotary dial and button panel. Main Controls: POWER ON/OFF, START/PAUSE, OPTION buttons (e.g., Extra Rinse, Pre-Wash).

Rotary Dial: Selects the main wash program (Cotton, Synthetic, Delicates, Wool, Anti-Stain, Fast 15', etc.).

Settings: Adjust spin speed (0-1400 RPM) and temperature (Cold to 90°C) for most programs. Use OPTION buttons to add functions like Delay Start (1-24 hours), Extra Rinse, or Reduced Creases. Child Lock: Press and hold specific buttons to activate/deactivate. Display: Shows selected program, time remaining, temperature, spin speed, and option icons.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Hose to standpipe or sink.

1. Turn off water taps before connecting hoses.
2. Ensure inlet hose filters are clean and washers are in place.
3. Drain hose should be placed between 60 cm and 100 cm high to prevent siphoning.
4. After connections, turn on taps and check for leaks.

Tip: Use only the supplied hoses. Do not overtighten connections.

Using Wash Programs

Supports various fabrics and soil levels.

1. Sort and load laundry: Separate by colour and fabric type. Do not overload.
2. Add detergent: Open dispenser drawer, add powder/liquid to correct compartments (I, II, *).
3. Select program: Turn dial to desired program (e.g., Cotton 60°C).
4. Adjust settings: Press buttons to modify spin speed, temperature, or add options.
5. Start cycle: Press START/PAUSE. The door locks and cycle begins.
6. Pause/Modify: Press START/PAUSE to pause; you may add/remove items if water level is low.
7. End of cycle: An audible signal sounds. Door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open the door during high-temperature washes or high-speed spin. Wait for the unlock indicator.

Care & Maintenance

Regular cleaning prevents odours and maintains performance.

1. Clean detergent dispenser: Pull out drawer, rinse under warm water.
2. Clean door seal: Wipe rubber gasket to remove lint and residue; leave door ajar between washes.
3. Run Drum Clean: Use monthly with a dedicated cleaner or at 90°C without laundry.
4. Clean filter: Locate at front bottom right; place towel, open cap slowly to drain residual water, remove and clean filter.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners on surfaces.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash and spin. Overflow Protection: Automatically stops water intake if detected. Imbalance Control: Reduces spin speed if load is uneven.

Regulatory Information

Complies with UK and EU safety and energy efficiency directives (e.g., Ecodesign, Energy Labelling). Manufactured under ISO 9001 quality standards. Copyright and trademarks owned by Hotpoint (a Haier company). For support, visit www.hotpoint.co.uk or contact 0333 305 2264 (UK).

Troubleshooting

Reset: Unplug machine for 5 minutes to reset electronic control.

Service: 0333 305 2264 (UK); www.hotpoint.co.uk