Hotpoint washing machine WMXTF 942K UK.R manual

The Hotpoint WMXTF 942K UK.R is a freestanding 9kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain Technology, Direct Spray for efficient rinsing, a large LED display, delay timer, and child lock. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, door, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	9kg drum for large loads
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM for faster drying
Anti-Stain Technology	Automatic stain removal programs
Direct Spray	Efficient rinsing system
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
LED Display	Shows time remaining, cycle stage, and settings
Noise Level	Low noise operation (approx. 74 dB)

Installation

Unpack and remove all transit bolts. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot and cold taps (if applicable); ensure washers are fitted.
Connect drain hose: Place in standpipe or hook over sink edge; secure with provided U-bend.
Level the machine: Adjust front feet using spanner until machine is stable.
Plug into a grounded 3-pin socket.

WARNING! Do not install in areas prone to freezing. Ensure water pressure is between 0.5 and 10 bar.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press POWER button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
Set preferences: Use SETTINGS button to adjust buzzer volume, default spin speed, etc.
Load detergent: Fill compartments I (pre-wash), II (main wash), and * (fabric softener).

CAUTION! Ensure transit bolts are removed before use to prevent damage.

Specifications

Model: WMXTF 942K UK.R
Capacity: 9kg
Energy Class: A+++
Spin Speed: 1400 RPM (adjustable)
Water Pressure: 0.5 - 10 bar
Programs: 15 including Eco 40-60, Wool, Sportswear, Anti-Stain
Dimensions (HxWxD): 85cm x 60cm x 60cm
Power Supply: 220-240V, 50Hz
Maximum Load: 9kg cotton, 4kg synthetics
Noise (wash/spin): 59 dB / 74 dB

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR knob, OPTION buttons (e.g., Extra Rinse, Pre-Wash), SPIN SPEED button, TEMPERATURE button, DELAY START button, CHILD LOCK button.

LED Display: Shows selected program, time remaining, temperature, spin speed, and active options.

Settings Menu: Press and hold SETTINGS to access buzzer volume, default spin, end-of-cycle signal. Programs: Cotton (20°C-90°C), Synthetics, Delicates, Quick Wash (30 mins), Wool, Drum Clean. Options: Extra Rinse, Pre-Wash, Anti-Crease, Delay Start (1-24h).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if using both). Drain: Place hose in standpipe (max height 100cm) or over sink.

Ensure taps are off before connecting hoses.
Check hose condition; replace if cracked.
Secure drain hose to prevent slipping.
After connection, turn on taps and check for leaks.

Tip: Use only genuine Hotpoint hoses; do not extend drain hose beyond 150cm.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed max weight; distribute evenly.
Add detergent: Use compartments I, II, and * as needed.
Select program: Turn knob to desired program (e.g., Cotton 40°C).
Adjust options: Press SPIN, TEMPERATURE, or OPTION buttons.
Start: Press START/PAUSE; door locks automatically.
Pause: Press START/PAUSE to add/remove items (if allowed).
End of cycle: Buzzer sounds; door unlocks after a short delay.

WARNING! Do not open door during high-temperature washes; wait for cool-down.

Special Functions

Anti-Stain Technology: Automatically selects time, temperature, and detergent dose for stubborn stains. Direct Spray: Continuously sprays drum for better rinse performance. Child Lock: Press and hold CHILD LOCK for 3 seconds; prevents changes during cycle.

Care & Cleaning

Monthly maintenance: Run "Drum Clean" program at 90°C without laundry. Clean detergent drawer and door seal regularly; wipe exterior with damp cloth.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on door or display.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016 and EU Ecodesign Directive. CE marked. Manufactured for the UK market. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Copyright © Hotpoint. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is shut; check plug and socket; press POWER.
No water intake	Taps off/hose kinked	Open taps; straighten hoses; check water pressure.
Excessive vibration	Transit bolts/leveling	Remove transit bolts; adjust feet; redistribute load.
Water not draining	Drain hose blocked	Check for kinks; clean filter (see manual).
Error codes (e.g., F01)	System fault	Unplug for 1 minute; restart. If persists, call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk