Hotpoint washing machine WMXTF 842P UK.M manual

The Hotpoint WMXTF 842P UK.M is a freestanding washing machine with an 8kg load capacity, 1400 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, door with safety lock, water inlet valves, drain pump filter, and adjustable feet.

Feature	Description
Capacity	8kg (dry laundry weight)
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Display	Digital LED with time remaining
Programs	Multiple including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection system
Door	Reversible for left/right opening
Dimensions (HxWxD)	850 x 600 x 600 mm

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Connect water supply: Attach inlet hoses to cold water tap (and hot if using dual supply). Ensure washers are fitted.
Connect drain hose: Place into standpipe or sink (minimum height 60cm, maximum 100cm).
Level the machine: Adjust the four feet using a spanner until the machine is stable.
Plug into a grounded 220-240V, 50Hz AC power outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash to remove any residue.

Remove transit bolts: Use spanner to remove bolts from rear; keep for future moves.
Connect power and turn on: The display will light up.
Run initial wash: Select the "Drum Clean" or "Cotton 90°C" program without laundry and run it.
Set preferences: Use the control dial and buttons to set language, time, and default options.

CAUTION! Ensure the drain hose is not kinked and the water inlet taps are fully open.

Specifications

Model: WMXTF 842P UK.M
Type: Freestanding Front Loader
Capacity: 8kg
Max Spin Speed: 1400 RPM
Energy Class: A+++
Water Consumption: Approx. 45 litres per cycle (Cotton 60°C)
Noise Level (Wash/Spin): 53/76 dB(A)
Programs: 15+ including Eco, Wool, Sport, Anti-Allergy
Power Supply: 220-240V, 50Hz
Weight: 70kg

Controls and Settings

Control Panel: Program dial, Start/Pause button, Option buttons (Delay, Speed, Temp), Display.

Basic Operation: Turn dial to select program. Use option buttons to modify spin speed, temperature, or add Delay Start. Press Start/Pause.

Display Symbols: Time remaining, Child Lock, Delay Start active, Spin speed, Temperature.

Settings Menu: Hold two buttons to access service menu for resetting filter alarm or changing beep volume.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if applicable). Use supplied hoses only.

Ensure taps are off before connecting.
Screw hoses hand-tight, then use pliers for a quarter turn more.
Drain hose: Secure in standpipe (do not push in more than 15cm) or over sink edge.
Check for leaks by turning taps on slowly before first wash.

Tip: Install a drip tray or leak detector for added safety, especially on wooden floors.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload. Close door securely.
Add detergent: Pour into main wash compartment of drawer. Use pre-wash compartment if needed.
Select program: Turn dial (e.g., Cotton, Synthetics, Delicates).
Adjust options: Press Temp, Spin, or Delay buttons as required.
Start: Press Start/Pause. The door locks and cycle begins.
At end: "End" appears. Door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open door during wash or spin. Wait for door lock symbol to go off.

Special Features

Delay Start: Set wash to begin up to 24 hours later. Child Lock: Press and hold two buttons to activate/deactivate. Anti-Allergy: Extra rinse for sensitive skin. Quick Wash: 30-minute cycle for lightly soiled loads. Drum Clean: Program to clean the drum monthly.

Care & Cleaning

Clean detergent drawer monthly: Pull out, rinse under tap. Clean door seal: Wipe with damp cloth to remove lint. Clean drain pump filter: Locate behind lower panel; place towel, unscrew filter cap, drain residual water, clean filter. Run Drum Clean program monthly.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners on the door or drum.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed, power issue	Ensure door is shut firmly. Check plug is in socket and power is on.
No water intake	Taps off, kinked hose, filter blocked	Open taps fully. Check hoses. Clean inlet filters in hose connectors.
Water not draining	Drain hose blocked/kinked, pump filter blocked	Check hose path. Clean pump filter (see Care section).
Excessive vibration/noise	Transit bolts not removed, uneven load, floor not level	Ensure all transit bolts are removed. Redistribute laundry. Re-level the feet.
Error code on display (e.g., F01)	Various faults	Consult manual error code list. Try resetting by unplugging for 2 minutes. If persists, call service.

Reset: Unplug for 2 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk