Hotpoint Washing Machine WMXTF 742 Manual

The Hotpoint WMXTF 742 is a 7kg capacity front-loading washing machine with 1400 RPM spin speed, featuring Hotpoint's Anti-Stain technology, Direct Spray pre-wash, multiple wash programs including Cotton, Synthetics, Delicates, Wool, and Quick cycles, delay timer, child lock, and energy efficiency class A+++. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and door lock.

FeatureDescription
Capacity7kg laundry load
Spin SpeedUp to 1400 RPM
Anti-Stain TechnologyAutomatic stain removal for common stains
Direct SprayPre-wash spray system for better detergent dissolution
Programs14 programs including Cotton, Synthetics, Delicates
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
Energy RatingA+++ for energy efficiency
Water ConsumptionApprox. 42 liters per cycle (Cotton 60°C)
Noise LevelWash: 53 dB, Spin: 73 dB

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Level the machine: Adjust front feet using wrench; use spirit level.
  3. Connect water inlet: Attach hoses to cold water tap (blue) and hot if needed (red).
  4. Connect drain hose: Place in standpipe or sink; secure with hook.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Check installation: Ensure hoses are tight, drain hose secured.
  2. Power on: Plug in; machine beeps and lights up.
  3. Run empty cycle: Select "Drum Clean" or "Cotton 90°C" without laundry.
  4. Set preferences: Use settings button to adjust beep volume, end signal.
  5. Load detergent: Fill compartments I (pre-wash), II (main wash), * (softener).

CAUTION! Use only HE (High Efficiency) detergent. Overdosing can cause excess suds.

Specifications

Controls and Settings

Control Panel: Rotary selector for programs, LED display, buttons for options.

Buttons: Start/Pause, Delay, Option (extra rinse, half load), Settings (beep, end signal), Child Lock.

Programs: Select with rotary knob - Cotton (various temps), Synthetics, Delicates, Wool, Quick 30', Sport, Jeans, Anti-Stain, Drum Clean. Options: Extra Rinse (adds rinse cycle), Half Load (reduces water for small loads), Delay (1-24 hours). Settings: Adjust beep volume (high/medium/low/off), end signal duration.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100 cm) or sink.

  1. Ensure taps are off before connecting hoses.
  2. Use only supplied hoses; do not lengthen.
  3. Secure drain hose with hook; avoid kinks.
  4. Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Sort laundry: Separate by color and fabric type.
  2. Load machine: Do not exceed 7 kg; distribute evenly.
  3. Add detergent: Use HE detergent; fill compartments as needed.
  4. Select program: Turn knob to desired program (e.g., Cotton 40°C).
  5. Add options: Press Option for extra rinse or half load if needed.
  6. Set delay: Press Delay to set start time (1-24 hours).
  7. Start: Press Start/Pause; door locks and cycle begins.
  8. After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash waterproof items (e.g., raincoats) as they may cause imbalance.

Special Functions

Anti-Stain: Select Anti-Stain program for automatic treatment of common stains (wine, grass, mud). Direct Spray: Pre-wets laundry for better wash results. Child Lock: Press and hold Child Lock for 3 seconds to lock controls (unlock same way). Delay Start: Set wash to start later (e.g., during off-peak hours).

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and run Drum Clean program.

  1. Detergent drawer: Remove and rinse under warm water.
  2. Door seal: Wipe with damp cloth to remove lint and residue.
  3. Drum clean: Run empty with Drum Clean program or Cotton 90°C.
  4. Exterior: Wipe with soft damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Never use harsh chemicals on drum or seal.

Regulatory Information

CE compliant; meets EU Ecodesign and Energy Labeling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Hotpoint is a trademark of Whirlpool Corporation.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerEnsure door fully closed; check plug and power outlet; press Start.
No water intakeTaps off/hose kinkedOpen taps; check hose for kinks; clean inlet filter.
Water not drainingDrain blocked/pump filterCheck drain hose for blockages; clean pump filter.
Excessive vibration/noiseTransit bolts/levelingEnsure transit bolts removed; re-level machine; redistribute load.
Error codes (e.g., F01)Various faultsConsult manual error code list; unplug for 5 minutes, retry.
Detergent not dispensingDrawer blockedClean detergent drawer compartments; use correct detergent type.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint Washing Machine WMXTF 742 Manual © - All Rights Reserved 2025