Hotpoint Washing Machine WMUD 9627 P Manual

The Hotpoint WMUD 9627 P is a freestanding washing machine with a 9 kg load capacity, 1600 rpm maximum spin speed, energy rating A+++, and multiple wash programs including Cotton, Synthetic, Delicate, Wool, and Quick Wash. It features AquaStop leak protection, a large LED display, delay start, child lock, and anti-crease function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, detergent drawer, drum, door, water inlet valves, drain pump, and adjustable feet.

FeatureDescription
Load Capacity9 kg maximum dry laundry weight
Spin SpeedUp to 1600 rpm (adjustable)
Energy RatingA+++ (most efficient)
AquaStopLeak protection system for hoses
LED DisplayShows time, cycle, and settings
Delay StartProgram start delay up to 24 hours
Child LockLocks control panel during operation
Anti-CreaseReduces wrinkles after wash
Detergent DrawerCompartments for pre-wash, main wash, softener
Quick Wash30-minute cycle for lightly soiled items

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (blue标记) and machine.
  3. Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
  4. Level the machine: Adjust feet using wrench; ensure machine is stable.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Check installation: Ensure hoses are secure and machine is level.
  2. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
  3. Set preferences: Use control knob to select language, time, etc.
  4. Load laundry: Do not exceed 9 kg; distribute evenly.
  5. Add detergent: Use drawer compartments as indicated.

CAUTION! Use only HE (High Efficiency) detergent to avoid excess suds.

Specifications

Controls and Settings

Control Panel: Program knob, Start/Pause button, LED display, option buttons.

Program Knob: Select wash programs (Cotton, Synthetic, Delicate, etc.). Options: Temperature (cold to 90°C), Spin Speed (0 to 1600 rpm), Delay Start (1-24h), Extra Rinse, Pre-Wash. LED Display: Shows time remaining, cycle stage, and selected options. Child Lock: Press and hold Start/Pause for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water tap. Drain: Place hose in standpipe (max height 100 cm).

  1. Turn off water tap before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Ensure drain hose is not kinked or submerged.

Tip: Check hose connections every 6 months for leaks.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Open door, place items evenly in drum.
  2. Add detergent: Pour into correct drawer compartment (I: pre-wash, II: main wash, *: softener).
  3. Select program: Turn knob to desired program (e.g., Cotton for linens).
  4. Adjust options: Press buttons for temperature, spin speed, etc.
  5. Start: Press Start/Pause; door locks automatically.
  6. End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during wash; wait until drum stops.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Locks controls during operation. Anti-Crease: Tumbles periodically after cycle to reduce wrinkles. Extra Rinse: Adds rinse for sensitive skin. Pre-Wash: For heavily soiled items.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

  1. Detergent drawer: Remove and rinse under water.
  2. Door seal: Wipe with damp cloth to remove residue.
  3. Filter: Turn drain pump cap counterclockwise; clean filter and housing.
  4. Run maintenance cycle: Use Cotton 90°C without laundry monthly.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Energy label A+++. Meets EU Ecodesign and energy efficiency standards. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Machine does not startPower/doorCheck plug; ensure door is closed properly; press Start/Pause.
No water intakeTap/hoseEnsure tap is on; check hose for kinks; clean inlet filter.
Water does not drainDrain hose/filterCheck hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/loadEnsure transit bolts removed; redistribute laundry evenly.
Error codes on displayVarious faultsRefer to manual error code list; unplug for 5 minutes, then retry.

Reset: Unplug for 5 minutes, then plug back in.

Service: 0344 822 4224; www.hotpoint.eu

Hotpoint Washing Machine WMUD 9627 P Manual © - All Rights Reserved 2025