Hotpoint washing machine WMUD 942 G manual

The Hotpoint WMUD 942 G is a 9kg freestanding washing machine with an A+++ energy rating, featuring a 1400 RPM spin speed, Direct Drive motor technology, Anti-Stain program, Steam Refresh cycle, and multiple wash programs for various fabrics. It includes a large LED display, intuitive controls, and delay start functionality. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9kg capacity drum, Direct Drive motor, LED control panel, detergent dispenser, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	9kg for large laundry loads
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM for faster drying
Direct Drive Motor	Quiet operation with reduced vibration
Anti-Stain Program	Targets specific stains (wine, grass, oil)
Steam Refresh	Reduces wrinkles and odors without washing
LED Display	Shows time remaining, cycle stage, and settings
Delay Start	Program start time up to 24 hours in advance
Quick Wash	30-minute cycle for lightly soiled items
Child Lock	Prevents accidental program changes

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach inlet hoses to cold and/or hot water taps (if applicable).
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and power on machine; run initial setup cycle.

Run cleaning cycle: Select "Drum Clean" or "Maintenance" program without laundry.
Set language: Press and hold settings button to select display language.
Test water connections: Run a quick rinse cycle to check for leaks.
Load detergent: Fill dispenser compartments as per detergent instructions.

CAUTION! Ensure machine is level to prevent excessive vibration and noise.

Specifications

Model: WMUD 942 G
Capacity: 9kg (cotton)
Energy Class: A+++
Spin Speed: 1400 RPM
Water Pressure: 0.5 - 8 bar
Programs: 16 programs including Cotton, Synthetics, Delicates, Wool, Anti-Stain, Steam
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Noise Level: 74 dB (spin), 53 dB (wash)

Controls and Settings

Access programs via rotary dial and touch buttons. Display shows selected options.

Control Panel: Rotary dial (select program), Start/Pause, Delay Start, Spin Speed, Temperature, Extra Rinse, Pre-wash, Child Lock.

Programs: COTTON (40°C-90°C), SYNTHETICS (30°C-60°C), DELICATES (cold-30°C), WOOL (hand wash cycle), ANTI-STAIN (select stain type), STEAM REFRESH (20 min), QUICK WASH (30 min), DRUM CLEAN. Settings: Adjust temperature (cold to 90°C), spin speed (400-1400 RPM or no spin), delay start (1-24 hours).

Connecting Water & Drain

Water Inlet: Connect hoses to cold/hot taps. Drain: Place hose securely.

Turn off water taps before connecting hoses.
Use only supplied hoses; do not overtighten.
Ensure drain hose is not kinked and is at correct height (60-100 cm from floor).
Check for leaks after first cycle.

Tip: Install a drip tray if machine is on wooden flooring.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load items loosely, close door securely.
Select program: Turn dial to desired program (e.g., Cotton).
Adjust settings: Press Temp, Spin, or Extra Rinse to modify.
Add detergent: Open dispenser, add powder/liquid to correct compartments.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to stop; wait for door lock to release.
End of cycle: Signal sounds; remove laundry promptly.
Delay start: Press Delay, set hours, then Start.

WARNING! Do not overload drum. Balance large items (sheets) with smaller ones.

Special Functions

Anti-Stain: Select program, then press Anti-Stain button to choose stain type (Red Wine, Grass, Oil, etc.). Steam Refresh: Use for lightly worn clothes to reduce odors/wrinkles. Child Lock: Press and hold Child Lock for 3 seconds to activate/deactivate.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly; remove and rinse under tap. Run Drum Clean program every 30 cycles or monthly. Leave door ajar after use to prevent mildew.

CAUTION! Do not use abrasive cleaners or solvents on surfaces.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at local number provided in warranty booklet.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug and power; ensure door is closed properly.
No water intake	Taps/hoses/filter	Open water taps; check hoses for kinks; clean inlet filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; re-level machine.
Water not draining	Drain hose/pump filter	Check hose for blockages; clean pump filter.
Error codes on display	Various faults	Consult manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Hotpoint service center; www.hotpoint.eu