Hotpoint washing machine WMTG 6524BS IT manual

The Hotpoint WMTG 6524BS IT is a 6 kg capacity front-loading washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, Direct Spray pre-wash, delay timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent drawer, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	6 kg dry laundry
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Anti-Stain Technology	Automatic treatment for common stains
Direct Spray	Pre-wash spray system for better detergent activation
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Locks control panel during operation
AquaStop	Leak protection system
Display	LED with time remaining and cycle indicators

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep bolts for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
Connect drain hose: Place in standpipe or sink edge; ensure no kinks.
Level the machine: Adjust front feet using spanner; use spirit level to check.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Run empty wash: Select "Drum Clean" or "Cotton 90°C" program without laundry.
Set preferences: Use OPTIONS button to adjust spin speed, temperature, etc.
Load detergent: Add to correct compartments of drawer (I=pre-wash, II=main wash, * = fabric softener).

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: WMTG 6524BS IT
Capacity: 6 kg
Dimensions (HxWxD): 85 x 60 x 55 cm
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 45 litres per cycle (cotton 60°C)
Spin Speed: 1400 RPM (adjustable)
Noise Level: Wash: 53 dB, Spin: 75 dB
Voltage: 220-240V, 50Hz
Programs: 15 including Eco 40-60, Wool, Sport, Jeans

Controls and Settings

Control Panel: POWER button, program selector knob, START/PAUSE, OPTIONS buttons, delay timer, child lock.

Program Knob: Select from 15 programs (Cotton, Synthetics, Delicates, Quick 30', etc.). OPTIONS: Adjust temperature, spin speed, extra rinse, anti-crease. Display: Shows time remaining, cycle phase, and selected options. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Settings: Default temperature and spin per program; adjustable via OPTIONS. Delay Timer: Set 1-24 hours delay start.

Connecting Water & Drain

Water Inlet: Two hoses (blue=cold, red=hot). Drain: Hose to standpipe or sink.

Ensure water taps are off before connecting hoses.
Connect hoses to machine inlet valves (screw hand-tight).
Connect other ends to taps; open taps fully.
Place drain hose in standpipe (max height 100 cm) or over sink edge.
Check for leaks after first connection.

Tip: Use only supplied hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Use compartment II for main wash; I for pre-wash if selected.
Select program: Turn knob to desired program (e.g., Cotton 40°C).
Adjust options: Press OPTIONS to change temperature, spin speed, etc.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock symbol.
End of cycle: Machine beeps; door unlocks after short delay.

WARNING! Do not open door during high-temperature washes; wait for cool-down.

Special Functions

Anti-Stain: Automatically selects optimal time/temperature for stains like wine, grass, grease. Direct Spray: Pre-wets laundry for better detergent penetration. Extra Rinse: Adds rinse cycle for sensitive skin. Anti-Crease: Tumbles periodically after cycle to reduce wrinkles.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and drum.

Clean drawer: Pull out, rinse under tap, dry, and reinsert.
Clean seal: Wipe rubber door seal with damp cloth to remove lint/residue.
Run drum clean: Use "Drum Clean" program or 90°C cotton cycle without laundry.
Leave door ajar after use to dry interior.

CAUTION! Unplug before cleaning exterior. Do not use abrasive cleaners.

Regulatory Information

CE compliant; meets EU ecodesign and energy labelling regulations. Manufactured under ISO 9001. Disposal: Follow local WEEE regulations; do not dispose with household waste. For support, visit www.hotpoint.eu or contact Hotpoint Italy: 800-123-456.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door firmly closed; check power outlet; press START/PAUSE.
No water intake	Taps closed/hose kink	Open water taps; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain hose blocked	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes (e.g., F01)	System fault	Unplug for 5 minutes, restart; if persists, call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 800-123-456; www.hotpoint.eu