Hotpoint washing machine WMTG 626BS IT manual

The Hotpoint WMTG 626BS IT is a 6kg capacity front-loading washing machine with 1200 RPM spin speed, featuring multiple wash programs, energy efficiency class A+++, delay timer, child lock, anti-flood system, and anti-vibration design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet.

Feature	Description
Capacity	6 kg dry laundry
Spin Speed	Up to 1200 RPM
Energy Class	A+++
Programs	15 wash programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Locks control panel during operation
Anti-Flood System	Protects against water leaks
Anti-Vibration Design	Reduced noise and movement
Display	LED digital display with time remaining
Door	Safety lock with transparent window

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on machine: Press POWER button.
Select program: Turn program selector to "Cotton 90°C".
Add detergent: Pour 100ml of detergent into compartment II.
Start cycle: Press START/PAUSE; let complete without laundry.
Set preferences: Use SETTINGS button to adjust beep volume, etc.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: WMTG 626BS IT
Capacity: 6 kg
Spin Speed: 1200 RPM (adjustable)
Dimensions (HxWxD): 85 x 60 x 55 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 230V~50Hz
Power Consumption: 1900 W (heating)
Programs: 15 including Eco 40-60, Wool, Sport, Drum Clean
Noise Level: 53 dB (washing), 73 dB (spinning)
Weight: 68 kg

Controls and Settings

Control Panel: POWER button, Program selector knob, Temperature button, Spin speed button, Delay Start button, Start/Pause button, Settings button.

Display Icons: Door locked, Child lock, Delay time, Temperature, Spin speed, Time remaining.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, etc.). Temperature: Press TEMP to cycle 30°C-90°C/Cold. Spin Speed: Press SPIN to cycle 400-1200 RPM/No Spin. Delay Start: Press DELAY to set 1-24 hours. Settings: Press SETTINGS to adjust beep volume, end signal, etc.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (filter screens inside). Drain: Place hose in standpipe (max height 100 cm).

Ensure taps are off before connecting hoses.
Check hose filters are clean.
Secure drain hose to prevent slipping.
After connection, open taps fully and check for leaks.

Tip: Use only provided hoses; do not extend or repair damaged hoses.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load loosely, do not overload.
Add detergent: Pour into compartment I (pre-wash), II (main wash), III (softener).
Select program: Turn knob (e.g., Cotton for cottons).
Adjust options: Set temperature, spin speed, delay if needed.
Start: Press START/PAUSE; door locks automatically.
Pause/Add: Press START/PAUSE to pause; wait for door unlock to add items.
End: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during spin cycle. Balance load to reduce vibration.

Safety Features

Child Lock: Press and hold CHILD LOCK button for 3 seconds to lock controls. Anti-Flood: Automatic shutoff if leak detected. Door Safety Lock: Door locks during wash and spin; unlocks at end or after pause.

Care & Cleaning

Monthly maintenance: Run "Drum Clean" program at 90°C without laundry. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass; wipe with damp cloth. Check and clean drain pump filter if draining slow.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE marked; complies with EU directives. Energy label A+++. For EU product registration, visit www.hotpoint.eu/register. Disposal: Dispose according to local WEEE regulations. For support, visit www.hotpointservice.com or contact 0333 305 1254 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power; press START.
No water intake	Taps off/hose kinked	Open taps; straighten hoses; check water pressure.
Water doesn't drain	Drain blocked/filter	Clean pump filter; ensure drain hose not too high.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 1254; www.hotpointservice.com