Hotpoint washing machine WMTG 625BS IT manual

The Hotpoint WMTG 625BS IT is a freestanding washing machine with a 6 kg load capacity, A+++ energy rating, and 1200 rpm spin speed. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Designed for standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	6 kg (cotton)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1200 rpm
Display	Digital with time remaining
Programs	14 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Locks control panel
Anti-Flood	AquaStop protection
Door	Reversible, with safety lock
Dimensions (HxWxD)	85 x 60 x 55 cm

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet; use spirit level.
Connect water inlet: Attach hot/cold hoses to taps; ensure washers are fitted.
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power socket.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and run a maintenance wash.

Open water taps fully.
Add detergent: Pour 100 ml of detergent into drum (not drawer).
Select program: Turn knob to "Cotton 90°C".
Start: Press Start/Pause; let cycle complete without laundry.
Set language: If display shows language options, use Settings button to select English.

CAUTION! First wash may contain residual water from factory testing; this is normal.

Specifications

Model: WMTG 625BS IT
Capacity: 6 kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 45 litres per cycle (cotton 60°C)
Spin Speed: 1200 rpm
Noise Level: Wash 53 dB, Spin 73 dB
Programs: 14 including Eco 40-60, Wool, Sport, Drum Clean
Power Supply: 220-240V, 50Hz, 10A
Weight: 68 kg

Controls and Settings

Control Panel: Program knob, Display, Temperature button, Spin speed button, Options buttons (Delay Start, Extra Rinse, etc.), Start/Pause.

Program Knob: Select from 14 programs. Display: Shows time, options, error codes. Temperature: Adjust from cold to 90°C. Spin Speed: Adjust from 0 (no spin) to 1200 rpm. Options: Delay Start (1-24h), Extra Rinse, Prewash, Easy Iron. Buttons: Start/Pause, Power, Child Lock (press 3 sec).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot). Drain: Place hose in standpipe (max height 100 cm, min 60 cm).

Ensure taps are off before connecting hoses.
Use supplied hoses only; do not lengthen.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Use drain hose support if provided.

Using Wash Programs

Select program based on fabric type.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Use drawer compartments I (prewash), II (main wash), * (softener).
Select program: Turn knob (e.g., Cotton for cottons).
Adjust settings: Temperature, spin speed, options as needed.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to pause; turn knob to change program (resets cycle).
End: Machine beeps; remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during high-temperature wash; wait for lock light to go off.

Special Functions

Delay Start: Press button, use +/- to set hours (1-24). Child Lock: Press and hold for 3 seconds; locks controls. Drum Clean: Run monthly with detergent to prevent odours.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean drain pump filter every 3 months (see manual for instructions).

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Labelling regulations. Disposal: Follow local WEEE regulations; do not dispose with household waste. For support, visit www.hotpoint.eu or contact 0333 305 1254 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug; ensure child lock is off; close door firmly.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water does not drain	Drain hose/pump filter	Check hose height; clean pump filter.
Excessive vibration	Transit bolts/level/load	Ensure transit bolts removed; level machine; redistribute load.
Error code on display	See manual	Refer to error code list; common: F01 (door issue), F05 (heater fault).

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 1254; www.hotpoint.eu