Hotpoint washing machine WMTF 722U UK N manual

The Hotpoint WMTF 722U UK N is a freestanding washing machine with a 7kg capacity, 1200 rpm spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, digital display, detergent drawer, water inlet hoses, drain hose, adjustable feet, and control panel.

FeatureDescription
Capacity7kg (dry laundry weight)
Spin SpeedUp to 1200 rpm
Energy RatingA+++ (most efficient)
DisplayDigital with time remaining indicator
Programs14 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay StartUp to 24 hours
Child LockPrevents accidental program changes
Anti-FloodAquaStop protection system
Door LockAutomatic during cycle
Adjustable FeetFor leveling the machine

Installation

Unpack and inspect contents. Place on a solid, level floor.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine.
  3. Connect drain hose: Place in standpipe or sink (max height 100cm).
  4. Level the machine: Adjust feet using a spanner; check with spirit level.
  5. Plug into a grounded 220-240V AC power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and power on the machine; run a maintenance wash.

  1. Initial power on: Press POWER button; display will light up.
  2. Run empty wash: Select Cotton 90°C program without laundry to clean drum.
  3. Set language: If applicable, use settings button to select ENGLISH.
  4. Test functions: Check door lock, water inlet, and drain.

CAUTION! Ensure all packaging and transit bolts are removed. Use two people for moving.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR knob, START/PAUSE, OPTION buttons (Delay, Extra Rinse, etc.), CHILD LOCK.

Display Icons: Time remaining, spin speed, temperature, delay start, child lock, door lock.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics). Options: Adjust temperature, spin speed, and extra functions via corresponding buttons. Delay Start: Press DELAY button and use +/- to set hours. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect blue-marked hose to cold water tap. Drain: Place hose in standpipe or sink.

  1. Ensure water tap is off before connecting hoses.
  2. Use only supplied hoses; do not overtighten.
  3. Secure drain hose to prevent slipping.
  4. Check for leaks after first connection.

Tip: Leave a small gap between drain hose end and water surface to prevent siphoning.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Open door, load items loosely (do not overload).
  2. Add detergent: Pour into drawer compartment II (main wash).
  3. Select program: Turn knob (e.g., Cotton for cottons).
  4. Set options: Adjust temperature, spin speed if needed.
  5. Start: Press START/PAUSE; door locks and cycle begins.
  6. Pause/change: Press START/PAUSE to pause; door unlocks after water drains.
  7. End of cycle: Machine beeps; door unlocks; remove laundry promptly.

WARNING! Do not open door during cycle; wait for unlock symbol. Remove all objects from pockets.

Special Functions

Delay Start: Delays cycle start up to 24 hours. Extra Rinse: Adds rinse for sensitive skin. Rapid Wash: Reduces time for lightly soiled loads. Child Lock: Locks control panel. Anti-Crease: Tumbles periodically after cycle to reduce wrinkles.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass to remove lint. Run drum clean program monthly (Cotton 90°C without laundry).

CAUTION! Do not use abrasive cleaners or solvents. Keep ventilation openings clear.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug and power; ensure door is closed properly.
No water intakeTaps/hoses/filterEnsure taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose/filterCheck hose for blockages; clean pump filter.
Excessive vibration/noiseTransit bolts/levelingEnsure transit bolts removed; re-level machine.
Error codes (e.g., F01)Various faultsConsult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine WMTF 722U UK N manual © - All Rights Reserved 2025