Hotpoint washing machine WMTF 624U IT manual

The Hotpoint WMTF 624U IT is a freestanding washing machine with a 6 kg load capacity, 1200 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	6 kg (cotton)
Spin Speed	Up to 1200 RPM
Energy Rating	A+++
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Display	Digital with time remaining indicator
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection system
Door Lock	Automatic during operation
Dimensions (HxWxD)	85 x 60 x 55 cm

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; ensure machine is stable.
Connect water supply: Attach inlet hose to cold water tap (3/4" thread).
Connect drain hose: Place in standpipe or hook over sink edge (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Connect power and water; turn on tap fully.
Open detergent dispenser; add 1/2 cup of bleach (no clothes).
Select "Cotton 90°C" program and press START.
After completion, the machine is ready for normal use.

CAUTION! Never use the machine without removing transit bolts—this can cause serious damage.

Specifications

Model: WMTF 624U IT
Capacity: 6 kg
Max Spin Speed: 1200 RPM
Energy Class: A+++
Water Pressure: 0.5 - 8 bar
Power Supply: 230V~50Hz
Power Consumption: 1900 W (heating)
Programs: 15 including Eco, Wool, Sport, Anti-Allergy
Noise Level: 56 dB (wash) / 76 dB (spin)
Weight: 68 kg

Controls and Settings

Control Panel: POWER button, program selector knob, digital display, START/PAUSE, OPTION buttons.

Display Icons: Time remaining, child lock, delay start, spin speed, temperature.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, etc.). Options: Press OPTION to adjust spin speed, temperature, or select extra rinse/pre-wash. Delay Start: Press DELAY to set start time (1-24 hours). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold fill only (hose supplied). Drain: Hose can be placed in standpipe or sink.

Ensure water tap is off before connecting hose.
Screw inlet hose to machine first, then to tap.
Drain hose must not be kinked or submerged.
Check for leaks after first connection.

Tip: Use hose clips if drain hose is placed in standpipe to prevent slipping.

Using Wash Programs

Select program based on fabric type and soil level.

Load clothes: Do not exceed 6 kg; distribute evenly.
Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for linens).
Adjust options: Temperature, spin speed if needed.
Press START; door locks automatically.
At end of cycle, "END" appears; door unlocks after a few minutes.

WARNING! Do not open door during wash or spin; wait for unlock indicator.

Special Functions

Delay Start: Set wash to begin later. Child Lock: Disables controls. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled loads. Rapid 30': Quick wash for lightly soiled items.

Care & Cleaning

Monthly maintenance: Run "Drum Clean" program (90°C without clothes). Clean detergent dispenser: Remove and rinse under water. Wipe door seal and glass: Remove lint and debris. Leave door ajar after use to prevent odors.

CAUTION! Unplug before cleaning exterior. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Conforms to EU directives for safety and electromagnetic compatibility. Disposal: Follow local regulations for WEEE. For support, visit www.hotpoint.eu or contact Hotpoint Assistenza Clienti at 848 800 123 (Italy).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power outlet; press START.
No water intake	Tap off/hose kinked	Open tap fully; straighten hose; check filter.
Water doesn't drain	Drain clogged/pump filter	Clean pump filter; ensure drain hose is not too high.
Excessive vibration	Transit bolts/uneven load	Ensure transit bolts removed; redistribute load; level feet.
Error code on display	See manual code list	Consult error code table; common: F01 (water issue), F05 (drain issue).

Reset: Unplug for 1 minute, then restart.

Service: 848 800 123; www.hotpoint.eu