Hotpoint Washing Machine WML 560 G Manual

The Hotpoint WML 560 G is a freestanding washing machine with a 6 kg load capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 rpm, delay timer, child lock, and anti-flood protection. Designed for standard household use with water and electricity connections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Load Capacity	6 kg (cotton)
Spin Speed	Up to 1200 rpm (adjustable)
Energy Class	A (energy efficient)
Wash Programs	14 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	Automatic water shut-off in case of leak detection
Display	LED digital display showing time, cycle, and options
Door Lock	Automatic safety lock during operation
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level floor near water and drain points.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water inlet: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in sink or standpipe (max height 100 cm).
Level the machine: Adjust feet using wrench; ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before first use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Select maintenance cycle: Choose "Drum Clean" or run a 90°C cotton cycle without laundry.
Add detergent: Use half dose of detergent in drawer.
Start cycle: Press START/PAUSE.
Set preferences: Use SETTINGS button to adjust default spin speed, temperature if needed.

CAUTION! Ensure water taps are fully open and hoses are not kinked.

Specifications

Model: WML 560 G
Capacity: 6 kg
Dimensions (HxWxD): 85 x 60 x 55 cm
Spin Speed: 1200 rpm (variable)
Energy Rating: A
Water Pressure: 0.5 - 8 bar
Power Supply: 230-240V ~ 50Hz
Programs: 14 including Eco, Cotton, Synthetics, Delicates, Wool, Quick 30'
Noise Level: Wash: 59 dB, Spin: 77 dB
Weight: 68 kg

Controls and Settings

Access controls via front panel buttons and dial.

Control Panel: POWER, PROGRAM SELECTOR dial, START/PAUSE, OPTION buttons (Delay, Extra Rinse, Prewash, etc.), CHILD LOCK, SPIN SPEED, TEMPERATURE.

Programs: Cotton (40°C, 60°C, 90°C), Synthetics, Delicates, Wool, Quick Wash, Drum Clean, Rinse & Spin, Spin Only. Settings: Default spin speed (400-1200 rpm), temperature (cold to 90°C), delay timer (1-24h). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Utilities

Water: Cold inlet (mandatory), hot inlet (optional). Drain: Standpipe or sink. Power: Grounded socket.

Turn off water and power before connecting.
Connect hoses: Blue to cold, red to hot (if used); tighten with spanner.
Secure drain hose: Use clip provided; ensure no sagging.
Plug into dedicated socket; avoid extension cords.

Tip: Check for leaks after first connection by running a short rinse cycle.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load evenly up to 6 kg max.
Add detergent: Pour into drawer compartments (I: prewash, II: main wash, *: softener).
Select program: Turn dial to desired program (e.g., Cotton 40°C).
Adjust options: Press OPTION buttons for Extra Rinse, Prewash, etc.
Set spin/temp: Use SPIN and TEMP buttons if needed.
Start: Press START/PAUSE; door locks automatically.
After cycle: "End" appears; door unlocks after a few minutes.
Unload and clean drawer/door seal periodically.

WARNING! Do not overload. Remove objects from pockets. Use correct detergent type.

Special Functions

Delay Timer: Set 1-24 hours delay start. Child Lock: Locks controls during cycle. Anti-Crease: Tumbles intermittently after cycle if not unloaded immediately. Extra Rinse: Adds rinse for sensitive skin. Prewash: For heavily soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run "Drum Clean" cycle every 30 washes. Check and clean drain pump filter if draining slow.

CAUTION! Do not use abrasive cleaners. Keep area around machine dry.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Manufacturer: Hotpoint. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224. This appliance is marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug; ensure door closed; deactivate child lock.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water doesn't drain	Drain hose/pump filter	Check hose height; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling/load	Remove transit bolts; re-level; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual error code list; reset by unplugging for 5 min.

Reset: Unplug for 5 minutes, then restart.

Service: +44 (0) 344 822 4224; www.hotpoint.eu