Hotpoint washing machine WML 540 G manual

The Hotpoint WML 540 G is a freestanding washing machine with a 5 kg load capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1000 rpm, delay timer, child lock, and imbalance control. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	5 kg (dry laundry)
Spin Speed	Up to 1000 rpm
Energy Class	A (energy efficient)
Programs	Cotton, Synthetic, Delicate, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Imbalance Control	Automatically redistributes load
Water Inlet	Cold water connection (hot optional)
Display	LED indicators for time, cycle, and status
Dimensions	Height 85 cm, Width 60 cm, Depth 54 cm

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn clockwise/anti-clockwise to level machine; ensure no rocking.
Connect water supply: Attach inlet hose to cold water tap (3/4” thread).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; run initial empty wash cycle.

Check connections: Ensure water and drain hoses are secure.
Select program: Turn dial to “Cotton 60°C”.
Add detergent: Pour 100 ml of liquid detergent into drawer II.
Start cycle: Press Start/Pause; let complete to clean drum.
Set preferences: Use option buttons for spin speed, temperature, etc.

CAUTION! First use may produce slight smoke or odor from new components; this is normal.

Specifications

Model: WML 540 G
Capacity: 5 kg
Spin Speed: 1000 rpm (adjustable)
Energy Rating: A
Water Pressure: 0.5–10 bar
Power Supply: 230V~50Hz
Power Consumption: 2000 W (max)
Programs: 12 including Cotton, Synthetic, Delicate, Quick (30°C), Wool, Rinse & Spin
Noise Level: Wash 59 dB, Spin 77 dB
Weight: 61 kg

Controls and Settings

Control Panel: Rotary selector (programs), Start/Pause, Option buttons (Temp, Spin, Delay), LED display.

Programs: Cotton (40°C–90°C), Synthetic (40°C–60°C), Delicate (30°C), Quick Wash (30°C), Wool, Rinse & Spin, Drain.

Options: Temperature selection (cold to 90°C), Spin speed (0–1000 rpm), Delay timer (1–24 h), Extra Rinse, Pre-wash.

Child Lock: Press and hold Temp + Spin for 3 seconds to enable/disable.

Connecting Water & Drain

Water Inlet: Connect to cold water tap (hot optional for certain programs). Drain: Hose to sink or standpipe.

Turn off water supply before connecting hoses.
Use only supplied hoses; do not extend or replace with non-approved types.
Secure drain hose to prevent slipping; maximum height 100 cm from floor.
Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden flooring.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 5 kg; distribute evenly.
Add detergent: Use drawer I (pre-wash), II (main wash), III (fabric softener).
Select program: Turn dial to desired program (e.g., Cotton for linens).
Set options: Adjust temperature, spin speed, extra rinse if needed.
Start: Press Start/Pause; display shows remaining time.
Pause/change: Press Start/Pause to stop; wait 2 minutes to open door.
End of cycle: Signal sounds; turn dial to Off; remove laundry promptly.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

Delay Timer: Set 1–24 hours delay start. Child Lock: Locks control panel. Imbalance Control: Auto-adjusts spin if load is uneven. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled items.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean drum: Run empty “Cotton 90°C” cycle with 100 ml vinegar every 3 months. Check drain pump filter periodically for debris.

CAUTION! Do not use abrasive cleaners or solvents on control panel.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug; ensure child lock is off; close door firmly.
No water intake	Tap closed/hose kinked	Open tap; straighten hose; check water pressure.
Water does not drain	Drain filter blocked	Clean pump filter; ensure drain hose is not too high.
Excessive vibration	Transit bolts/uneven load	Ensure transit bolts removed; redistribute laundry; level feet.
Door will not open	Water in drum/safety lock	Wait for safety lock to release; run drain program.
Error codes (e.g., F01)	Motor/control fault	Unplug for 5 minutes; restart. If persists, call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: +44 (0) 344 822 4224; www.hotpoint.eu