Hotpoint washing machine WMJLF 842P UK manual

The Hotpoint WMJLF 842P is a freestanding 8kg capacity washing machine with 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features Hotpoint's Anti-Stain Technology, Direct Spray technology for efficient rinsing, a large porthole door, LED display, delay start, and child lock. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8kg drum, LED control panel, detergent drawer, filter, adjustable feet, water inlet hoses, drain hose.

FeatureDescription
Capacity8kg (cotton)
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (scale A+++ to D)
Anti-Stain TechnologyAutomatic stain removal for common stains
Direct SprayEfficient rinsing system
Programs15 programs including Cotton, Synthetic, Delicates, Quick Wash
Delay StartUp to 24 hours
Child LockPrevents accidental program changes
DisplayLED with time remaining indicator
DoorLarge porthole with safety lock

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Level the machine: Adjust front feet using spanner; use spirit level.
  3. Connect water supply: Attach inlet hoses to cold water tap (3/4”); ensure washers are fitted.
  4. Connect drain hose: Place in standpipe (min 60cm height) or sink; secure with U-bend.
  5. Plug into grounded socket (220-240V, 13A).

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Plug in and press POWER button.
  2. Run empty wash: Select "Cotton 90°C" program without detergent to clean drum.
  3. Set preferences: Use SETTINGS button to adjust buzzer volume, default spin speed.
  4. Load detergent: Fill drawer compartments I (pre-wash), II (main wash), * (softener).

CAUTION! Ensure machine is level to prevent excessive vibration during spin.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR knob, START/PAUSE, OPTIONS (Extra Rinse, Pre-wash), DELAY START, CHILD LOCK.

Programs: Cotton (20°C-90°C), Synthetic (30°C-60°C), Delicates, Wool, Quick Wash (30 mins), Eco 40-60, Anti-Stain, Spin Only, Drain.

Settings: Press SETTINGS to adjust end-of-cycle buzzer (On/Off), default spin speed, temperature. Child Lock: Press and hold CHILD LOCK for 3 seconds; icon appears. Delay Start: Press to set start time (1-24 hours).

Connecting Water & Drain

Cold fill only (hoses supplied). Drain via standpipe or sink.

  1. Turn off water tap before connecting hoses.
  2. Connect hoses: Screw onto tap hand-tight; do not overtighten.
  3. Check for leaks: Turn on tap; inspect connections.
  4. Drain hose: Insert into standpipe (min 60cm, max 100cm height) or over sink edge.

Tip: Use hose clips if draining to sink. Ensure drain hose is not kinked.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not overload; distribute evenly.
  2. Add detergent: Use drawer compartments; follow dosage instructions.
  3. Select program: Turn PROGRAM SELECTOR knob.
  4. Adjust options: Press OPTIONS for Extra Rinse, Pre-wash if needed.
  5. Start: Press START/PAUSE; door locks automatically.
  6. Pause: Press START/PAUSE to stop; door unlocks after 2 minutes if water is not hot.
  7. End of cycle: Buzzer sounds; remove laundry promptly to avoid creasing.

WARNING! Do not open door during wash; wait until unlock symbol appears.

Special Functions

Anti-Stain Technology: Automatically adjusts time/temperature for stains like wine, grass. Direct Spray: Improves rinse efficiency. Delay Start: Set wash to finish at desired time. Child Lock: Disables controls when activated.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, filter.

  1. Detergent drawer: Remove by pressing release lever; wash under tap.
  2. Door seal: Wipe with damp cloth; remove debris.
  3. Filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter cap; clean under running water.
  4. Drum: Run "Drum Clean" program monthly (if available) or Cotton 90°C without laundry.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste electrical products must not be disposed of with household waste; recycle at local facility. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Hotpoint is a trademark of Whirlpool Corporation.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug is in; ensure door is closed properly; press START/PAUSE.
No water intakeTaps/hosesEnsure taps are on; check hoses for kinks; clean inlet filter.
Excessive vibrationTransit bolts/levelEnsure transit bolts removed; adjust feet to level floor.
Water not drainingDrain hose/filterCheck drain hose is not kinked; clean pump filter.
Error codes (e.g., F01)FaultRefer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint washing machine WMJLF 842P UK manual © - All Rights Reserved 2025