Hotpoint Washing Machine WMJLD 943P UK Manual

The Hotpoint WMJLD 943P is a freestanding washing machine with a 9kg capacity, 1400 rpm spin speed, A+++ energy rating, and multiple wash programs. It features AquaCare™ technology for reduced creasing, Steam Refresh for removing odours, and DirectSpray for even detergent distribution. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and door with safety lock.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn adjustable feet to level the machine; use spirit level.
3. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if needed (red marker). Ensure washers are fitted.
4. Connect drain hose: Place hose into standpipe or sink; secure with provided U-bend.
5. Plug into mains power: Use a grounded 220-240V, 50Hz socket.

WARNING! Do not install in areas prone to freezing. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash to remove any residues.

1. Ensure machine is installed correctly and plugged in.
2. Open detergent drawer and pour 100ml of white vinegar or a washing machine cleaner into compartment II.
3. Close drawer and door. Select the "Drum Clean" programme (or Cotton 90°C if not available).
4. Press Start. Allow cycle to complete.
5. After cycle, wipe inside of drum and door seal with a damp cloth.

CAUTION! Never use the machine without removing transit bolts, as this can cause serious damage.

Specifications

• Model: WMJLD 943P UK
• Capacity: 9kg
• Spin Speed: 1400 rpm (adjustable)
• Energy Rating: A+++
• Water Pressure: 0.5 - 10 bar
• Programmes: 15 including Cotton, Eco Cotton, Synthetic, Delicates, Wool, Quick Wash (14'), Sport, Jeans, Anti-Allergy, Drum Clean
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Power Supply: 220-240V, 50Hz
• Max Load: 9kg (cotton)
• Noise Level: Wash: 53 dB, Spin: 74 dB

Controls and Settings

Control Panel: Programme selector knob, display, option buttons (Delay Start, Extra Rinse, Speed Perfect, etc.), Start/Pause button.

Programme Selection: Turn knob to desired programme. Display shows default time, temperature, and spin speed.

Options: Press buttons to modify: - Delay Start: Set finish time (1-24 hrs). - Extra Rinse: Adds an additional rinse cycle. - Speed Perfect: Reduces cycle time. - AquaCare™: Activates crease reduction. - Steam Refresh: Select for odour removal cycle.

Temperature & Spin: Use Temp and Spin buttons to adjust (if programme allows).

Child Lock: Press and hold Delay Start and Speed Perfect for 3 seconds to activate/deactivate.

Connecting Water & Drain

Correct connection is vital for operation.

1. Water Inlet: Connect blue hose to cold tap; red to hot if using hot fill. Do not overtighten.
2. Drain Hose: Insert into standpipe (min 60cm, max 100cm height) or over sink edge using U-bend.
3. Check for leaks: Turn on taps and inspect connections before first wash.

Tip: Use only the supplied hoses. Do not extend drain hose beyond 1.5m.

Using Wash Programs

Select programme based on fabric type and soil level.

1. Load laundry: Do not overload; distribute evenly.
2. Add detergent: Pour powder/liquid into correct compartment (I: pre-wash, II: main wash, ❉: softener).
3. Select programme: Turn knob (e.g., Cotton for cottons, Synthetic for synthetics).
4. Adjust options: Set temperature, spin, and any extra functions.
5. Start: Press Start/Pause. Door locks and cycle begins.
6. At end: "End" appears. Door unlocks after a few minutes. Remove laundry promptly.

WARNING! Do not open door during cycle; hot water may cause burns. Wait for door lock light to go off.

Care & Maintenance

Regular care ensures longevity.

• Cleaning Drum: Run Drum Clean programme monthly with cleaner.
• Cleaning Detergent Drawer: Pull out, rinse under tap, dry, and reinsert.
• Cleaning Door Seal: Wipe with damp cloth; remove debris from fold.
• Filter Cleaning: Locate filter behind bottom panel; turn anti-clockwise to remove; clean under running water.
• Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Never use harsh chemicals.

Regulatory Information

Complies with UK safety standards and EU Ecodesign Directive. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. Hotpoint is a trademark of Haier Europe Trading S.r.L. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk