The Hotpoint WMFUG 942P is a freestanding 9kg capacity washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, Direct Spray for efficient rinsing, a large LED display, delay start, and child lock. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: 9kg drum, LED control panel, detergent drawer, filter, adjustable feet, water inlet hoses, drain hose.
| Feature | Description |
|---|---|
| Capacity | 9kg (cotton) for large loads |
| Energy Rating | A+++ for high efficiency |
| Spin Speed | Up to 1400 RPM for faster drying |
| Anti-Stain Technology | Targets specific stains (wine, grass, mud) |
| Direct Spray | Continuous water spray for better rinse performance |
| LED Display | Shows time remaining, program, and settings |
| Delay Start | Postpone start up to 24 hours |
| Child Lock | Locks controls during operation |
| Quick Wash | 30-minute program for lightly soiled items |
| Allergy Care | Extra rinse and higher temperature to remove allergens |
Unpack and remove transit bolts. Place on level floor.
WARNING! Do not use extension leads. Ensure water connections are tight to avoid leaks.
Before first wash, run a maintenance cycle.
CAUTION! Ensure transit bolts are removed to prevent damage. Check for leaks after first fill.
Control Panel: POWER, START/PAUSE, PROGRAM selector knob, OPTION buttons (e.g., Extra Rinse, Pre-Wash), DELAY START, CHILD LOCK.
Display: Shows selected program, time remaining, spin speed, temperature, and options.
Programs: Select via knob (Cotton, Synthetic, Delicates, Wool, Quick 30', Anti-Stain, etc.). Options: Adjust spin speed (0-1400 RPM), temperature (cold-90°C), extra rinse, pre-wash. Settings Menu: Access by holding SETTINGS button; adjust buzzer, default spin, etc.
Water Inlet: Connect blue-cold hose to cold tap (white-hot optional if machine supports hot fill). Drain: Hose to standpipe (max height 100 cm) or sink.
Tip: Do not kink hoses. Ensure drain hose is not submerged to prevent siphoning.
Select program based on fabric and soil level.
WARNING! Do not open door during wash; wait for lock release. Balance loads to avoid vibration.
Anti-Stain: Select program, then press ANTI-STAIN button; machine adjusts for specific stains. Direct Spray: Continuous water spray during rinse for better detergent removal. Child Lock: Press and hold CHILD LOCK for 3 seconds to lock/unlock controls.
Regular maintenance ensures performance.
CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.
Complies with UK safety and EMC regulations. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 226 226.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Door not closed/power | Ensure door shut firmly; check plug and socket; press START/PAUSE. |
| No water intake | Taps off/hose kinked | Open taps; check hose for kinks; clean inlet filter. |
| Excessive vibration | Transit bolts/leveling | Ensure transit bolts removed; adjust feet for level; redistribute load. |
| Water not draining | Drain hose blocked | Check hose for blockages; clean pump filter. |
| Error codes (e.g., F01) | Fault detected | Consult manual error code list; unplug for 5 minutes, restart. |
Reset: Unplug for 5 minutes, then restart.
Service: 03448 226 226; www.hotpoint.co.uk