Hotpoint washing machine WMFUG 942G UK manual

The Hotpoint WMFUG 942G is a freestanding 9kg capacity washing machine with an A+++ energy rating, featuring a 1400 rpm spin speed, multiple wash programs including Eco 40-60, Cotton, Synthetic, Delicate, and Quick Wash, a delay timer up to 24 hours, child lock, and a digital display. It includes Hotpoint's AquaStop technology for leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 9kg drum capacity, Digital display and control dial, Detergent and softener dispenser drawer, AquaStop leak protection system, Adjustable feet, Transit bolts.

Installation

Unpack and remove all packaging materials and transit bolts.

1. Position the machine: Place on a solid, level floor near water inlet and drain.
2. Connect water supply: Attach inlet hose to cold water tap (ensure washer is included).
3. Connect drain hose: Place into standpipe or sink (minimum height 60cm, maximum 100cm).
4. Level the machine: Adjust the feet using a spanner until the machine is stable.
5. Plug into a grounded 220-240V AC power socket.

WARNING! Do not remove transit bolts before moving the machine into position. Ensure the water inlet hose is not kinked.

First-Time Setup

After installation, run a maintenance wash before first use.

1. Remove any remaining packaging from inside the drum.
2. Connect power and turn the machine on.
3. Run a 90° Cotton cycle without laundry and with a small amount of detergent to clean the drum.
4. Set the clock: Press and hold the delay button until the display flashes, then use +/- to set time.
5. Familiarise yourself with the control panel and program dial.

CAUTION! Ensure the machine is level to prevent excessive vibration during spin cycles.

Specifications

• Model: WMFUG 942G UK
• Capacity: 9kg
• Energy Rating: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 9,500 litres per year
• Spin Speed: 1400 rpm
• Noise Level (Wash/Spin): 53 dB / 74 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Weight: 70 kg
• Mains Supply: 220-240V ~ 50Hz
• Max Power: 2100 W

Controls and Settings

Control Dial: Turn to select wash program. Digital Display: Shows time, options, and status.

Buttons: Start/Pause, Delay Timer (+/-), Spin Speed, Temperature, Extra Rinse, Child Lock.

Programs: Cotton (40°-90°), Eco 40-60, Synthetic, Delicate, Wool, Silk, Quick Wash (30 min), Sportswear, Jeans, Anti-Allergy, Drum Clean, Spin Only, Rinse & Spin. Options: Adjust spin speed (400-1400 rpm or No Spin), water temperature (Cold to 90°), extra rinse, pre-wash.

Connecting Water & Drain

Water Inlet: Cold fill only (hose supplied). Drain: Hose to standpipe or sink.

1. Ensure both taps are off before connecting hoses.
2. Screw inlet hose to cold water tap (do not overtighten).
3. Secure drain hose in standpipe (use hook if provided) or over sink edge.
4. Check for leaks by turning on tap briefly before first wash.

Tip: The drain hose should not be submerged in water to prevent siphoning.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not overload; distribute evenly.
2. Add detergent: Pour into main wash compartment (I) of dispenser drawer. Add softener to compartment (II).
3. Select program: Turn dial to desired program (e.g., Cotton 40°).
4. Adjust options: Press Temp, Spin, or Extra Rinse buttons as needed.
5. Set delay (optional): Press Delay button and use +/- to set start time.
6. Start: Press Start/Pause. The door locks and cycle begins.
7. At cycle end: "End" appears. Door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open the door during a wash cycle. Wait until the door lock symbol disappears.

Special Functions

Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate. Locks all buttons. Delay Timer: Delays start up to 24 hours. Extra Rinse: Adds an additional rinse cycle for sensitive skin or heavy detergent use. Drum Clean: Run monthly (or when prompted) with detergent to maintain hygiene.

Care & Cleaning

Regularly clean the detergent drawer, door seal, and drum.

1. Detergent drawer: Pull out, rinse under tap, and dry before replacing.
2. Door seal: Wipe with a damp cloth to remove lint and residue.
3. Drum: Run Drum Clean program monthly at 90° without laundry.
4. Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners.

CAUTION! Unplug the machine before cleaning. Never use steam or high-pressure cleaners.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). UKCA marked. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For more information, contact your local authority. Manufacturer: Hotpoint, Peterborough, PE2 9JB, UK. Support: 03448 113 113 or www.hotpoint.co.uk.

Troubleshooting

Reset: Unplug for 2 minutes to reset the electronic control.

Service: 03448 113 113; www.hotpoint.co.uk. Have model and serial number ready.