Hotpoint washing machine WMFUG 842P UK.M manual

The Hotpoint WMFUG 842P UK.M is a freestanding 8kg capacity washing machine with an A+++ energy rating, featuring a 1400 RPM spin speed, multiple wash programs including Eco 40-60, Quick Wash, and Delicates, a delay timer up to 24 hours, and child lock safety features. It includes a digital display, rotary program selector, and Hotpoint's Anti-Stain technology. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8kg drum capacity, Digital display, Rotary program selector, Detergent and softener dispensers, Door with safety lock, Adjustable feet, Water inlet hoses, Drain hose.

Feature	Description
Capacity	8kg (dry laundry weight)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Display	Digital LED with cycle time and status
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Stain Technology	Automatic treatment for common stains
Door Lock	Safety lock during operation
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure washers are fitted.
Connect drain hose: Place hose into standpipe or sink; secure with provided U-bend.
Level the machine: Adjust front feet using a spanner; use spirit level to check.
Plug into a grounded 220-240V AC power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press the power button.
Run empty maintenance wash: Select the "Drum Clean" or "Maintenance" program at 90°C without laundry.
Set preferences: Use the control dial and buttons to set default options like spin speed or temperature.
Load detergent: Fill the detergent dispenser drawer as per instructions.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: WMFUG 842P UK.M
Capacity: 8 kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 9,500 litres per year
Spin Speed: 1400 RPM
Noise Level (wash/spin): 53/75 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Weight: 70 kg
Voltage: 220-240V ~ 50Hz
Max Power: 2100 W

Controls and Settings

Access settings via rotary dial and button panel.

Control Panel: Power button, Rotary program selector, Start/Pause button, Delay timer button, Spin speed reduction button, Temperature button, Option buttons (e.g., Extra Rinse, Pre-wash).

Programs: COTTON (40°C, 60°C, 90°C), SYNTHETICS, DELICATES, WOOL, QUICK WASH (30 min), SPORT, ANTI-ALLERGY, DRUM CLEAN. Settings: Adjust temperature (Cold to 90°C), spin speed (400 to 1400 RPM), delay timer (1-24 hrs). Options: Extra Rinse, Pre-wash, Child Lock (press and hold relevant buttons).

Connecting Water & Drain

Water Inlet: Cold fill standard (hot optional). Drain: To standpipe or sink.

Turn off water supply before connecting hoses.
Connect inlet hoses to taps; hand-tighten, then a quarter turn with pliers.
Place drain hose into standpipe (max height 100 cm) or secure over sink edge.
Check for leaks by turning on water supply briefly before first wash.

Tip: Use only the supplied hoses; do not extend or repair them.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 8kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn dial to desired program (e.g., Cotton 40°C).
Adjust settings: Press Temp, Spin, or Option buttons as needed.
Set delay (optional): Press Delay button to set start time.
Start: Press Start/Pause; door locks and cycle begins.
End of cycle: Machine beeps; door unlocks after a short delay.

WARNING! Do not open door during wash; wait for unlock signal. Remove items promptly to avoid creasing.

Safety Features

Child Lock: Press and hold specific buttons to lock controls. Door Lock: Automatic during operation. Overflow Protection: Automatically stops water intake if detected. Unbalanced Load Detection: Adjusts spin or stops to prevent damage.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent drawer: Pull out, rinse under tap, dry and replace.
Clean door seal: Wipe rubber gasket to remove lint and residue.
Run drum clean: Monthly, use "Drum Clean" program or 90°C cotton cycle without laundry.
Clean filter: Locate at front bottom; turn drain cap slowly to release water, then remove and clean filter.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. CE marked. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 0333 305 3515. Keep this manual for future reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/Door/Child Lock	Check plug and power; ensure door closed properly; check if Child Lock is activated.
No water intake	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check drain hose for blockages or high loop; clean pump filter.
Excessive vibration/noise	Transit bolts/load/leveling	Ensure transit bolts removed; redistribute laundry unevenly; re-level machine.
Error codes on display (e.g., F01, F05)	Various faults	Consult error code list in manual; try resetting by unplugging for 2 minutes.
Poor wash results	Detergent/program/load	Use correct detergent amount; select suitable program; do not overload.

Reset: Unplug for 2 minutes, then restart.

Service: 0333 305 3515; www.hotpoint.co.uk