Hotpoint washing machine WMFUG 742G UK manual

The Hotpoint WMFUG 742G is a freestanding 7kg washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay start, quick wash options, and child safety lock. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum capacity, Digital display, Program selector knob, Delay start button, Quick wash options, Child lock, Drain pump filter.

Feature	Description
Drum Capacity	7kg for standard household laundry loads
Energy Rating	A+++ for high energy efficiency
Spin Speed	Up to 1400 RPM for faster drying
Digital Display	Shows time remaining, program, and settings
Program Selector	Knob for selecting wash programs
Delay Start	Delay wash start up to 24 hours
Quick Wash	30-minute and 15-minute quick wash options
Child Lock	Locks controls to prevent accidental changes
Drain Pump Filter	Accessible filter for maintenance
Door Lock	Automatic door lock during operation

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet to ensure machine is stable and does not vibrate.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on the washing machine; run initial setup.

Run a maintenance wash: Select a 90°C cotton program without laundry to clean drum.
Set clock: Press and hold the delay button to set current time on display.
Test a wash: Load a small load and run a quick wash to ensure proper operation.
Familiarise with controls: Review program chart and button functions.

CAUTION! Ensure machine is level and all connections are secure before first use.

Specifications

Model: Hotpoint WMFUG 742G UK.
Capacity: 7kg.
Energy Rating: A+++.
Spin Speed: 1400 RPM.
Programs: Cotton, Synthetic, Delicates, Wool, Quick Wash, Eco, etc.
Water Supply: Cold fill (can be connected to hot if needed).
Dimensions (HxWxD): 85cm x 60cm x 60cm (approx).
Power Supply: 220-240V, 50Hz.
Noise Level: Wash: 56 dB; Spin: 76 dB.

Controls and Settings

Access settings via control panel. Main Controls: POWER, Program selector knob, Start/Pause, Delay start, Spin speed reduction, Temperature selection.

Display: Shows program time, delay time, spin speed, temperature, and error codes.

Programs: COTTON (various temps), SYNTHETICS, DELICATES, WOOL, QUICK WASH (30/15 min), ECO, SPIN ONLY, RINSE & SPIN. Settings: Adjust temperature (cold to 90°C), spin speed (400-1400 RPM), delay start (1-24 hrs). Special: Child lock (press and hold for 3 sec), Pre-wash option, Extra rinse option.

Connecting Utilities

Water: Cold fill inlet hose. Drain: Hose to standpipe or sink. Power: Grounded UK socket.

Turn off water supply before connecting hoses.
Ensure drain hose is not kinked and is at correct height (60-100 cm).
Use only recommended hoses and fittings.
Check for leaks after connections.

Tip: Use hose clips to secure connections and prevent leaks.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load sorted laundry, close door securely.
Select program: Turn knob to desired program (e.g., Cotton 40°C).
Adjust settings: Press temperature or spin buttons to modify if needed.
Add detergent: Pour into detergent drawer (main wash and pre-wash compartments).
Start: Press Start/Pause; door locks and wash begins.
Pause/change: Press Start/Pause to pause; wait for door unlock symbol to add/remove items.
End of cycle: Machine beeps; door unlocks after a short delay.

WARNING! Do not overload drum. Balance loads to reduce vibration.

Special Features

Delay Start: Set delay up to 24 hours. Child Lock: Locks control panel. Quick Wash: 30-minute or 15-minute cycles for lightly soiled loads. Extra Rinse: Adds an additional rinse cycle. Pre-wash: For heavily soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run maintenance wash (90°C cotton program without laundry) monthly. Clean drain pump filter every 3 months.

CAUTION! Do not use abrasive cleaners. Keep area around machine dry.

Regulatory Information

Complies with UK safety and energy efficiency standards. CE marked. Waste Electrical and Electronic Equipment (WEEE) directive: Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug is in; ensure door is closed properly; press Start/Pause.
No water entering	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Machine vibrating excessively	Transit bolts/level	Ensure transit bolts removed; adjust feet to level machine; redistribute load.
Water not draining	Drain hose/filter	Check drain hose is not blocked or too low; clean pump filter.
Error code on display	Various faults	Consult manual for code meaning; reset by turning off and on; call support if persists.

Reset: Turn machine off at plug for 2 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk