Hotpoint washing machine WMFUG 742 P UK.M manual

The Hotpoint WMFUG 742 P UK.M is a 7kg capacity freestanding washing machine with an A+++ energy rating, 1400 rpm spin speed, and multiple wash programs. It features Hotpoint's Anti-Stain technology, direct spray jet system, rapid wash options, delay timer, child lock, and easy iron function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	7kg (dry weight) for family-sized loads
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 rpm for faster drying
Anti-Stain Technology	Automatic stain removal for common stains
Direct Spray Jet	Sprays detergent directly onto clothes for better cleaning
Rapid Wash	30-minute and 15-minute quick wash options
Delay Timer	Up to 24 hours delay start
Child Lock	Locks control panel during operation
Easy Iron	Reduces creasing for easier ironing
Display	LED digital display with time remaining indicator

Installation

Unpack and remove all transit bolts and packaging. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn adjustable feet to level machine; use spirit level.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink hook; ensure no kinks.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press power button.
Run empty wash: Select "Drum Clean" or "Maintenance" program at 90°C without detergent.
Set preferences: Use control dial and buttons to set default options if available.
Load detergent: Fill dispenser compartments as per detergent instructions.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: WMFUG 742 P UK.M
Capacity: 7kg
Energy Class: A+++
Spin Speed: 1400 rpm
Water Pressure: 0.5 - 8 bar
Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, Anti-Stain, Drum Clean
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Noise Level: Wash: 53 dB, Spin: 75 dB

Controls and Settings

Control Panel: Power button, program selector dial, start/pause button, option buttons (Delay, Easy Iron, Rapid, etc.), display.

Program Dial: Select from Cotton (40°C-90°C), Synthetics (40°C-60°C), Delicates (30°C), Wool, Quick Wash (30 min/15 min), Anti-Stain, Drum Clean.

Options: Delay Timer (1-24h), Easy Iron (reduces spin speed), Extra Rinse, Pre-wash, Rapid (reduces time), Child Lock (press and hold for 3 seconds). Display shows time remaining, selected options, and error codes.

Connecting Water & Drain

Water Inlet: Cold water connection (and optional hot). Drain: Hose to standpipe or sink.

Turn off water supply before connecting hoses.
Connect inlet hoses to machine (blue for cold, red for hot) and tap.
Secure drain hose at 60-100 cm height; use hook if provided.
Check for leaks by running short rinse cycle.

Tip: Use only supplied hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn dial to desired program.
Set options: Press option buttons as needed (e.g., Easy Iron, Extra Rinse).
Start: Press start/pause button; door locks automatically.
Pause/change: Press start/pause to pause; wait for door unlock symbol.
End of cycle: Machine beeps; door unlocks after short delay.

WARNING! Do not open door during spin cycle. Unbalanced load may cause machine to stop or adjust spin.

Special Functions

Anti-Stain Technology: Automatically adjusts time, temperature, and drum action for stain removal. Easy Iron: Reduces spin speed to minimize creasing. Delay Timer: Set wash to finish at desired time. Child Lock: Prevents accidental program changes.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent dispenser: Remove monthly; rinse under warm water.
Clean door seal: Wipe rubber gasket to remove lint and residue.
Run Drum Clean: Monthly, use hot cycle or dedicated program.
Clean filter: Locate at front bottom; turn counterclockwise to remove; clear debris.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 226 226 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is firmly closed; check power outlet and fuse.
No water intake	Taps closed/hose kinked	Open water taps; check hose for kinks; clean inlet filter.
Water not draining	Drain hose blocked/filter	Check drain hose for blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes on display	Various faults	Consult manual error code list; common: F01 (door issue), F05 (drain fault).

Reset: Unplug for 5 minutes, then restart. For persistent errors, call support.

Service: 03448 226 226; www.hotpoint.co.uk