Hotpoint Washing Machine WMF 760 P Manual

The Hotpoint WMF 760 P is a freestanding front-loading washing machine with a 7kg capacity, 1200 RPM spin speed, energy efficiency class A+++, multiple wash programs including Cotton, Synthetics, Delicates, Quick Wash, and Wool, delay timer, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, water inlet hoses, drain hose, adjustable feet, and door lock.

FeatureDescription
Capacity7 kg (dry laundry weight)
Spin SpeedUp to 1200 RPM
Energy ClassA+++ (most efficient)
Programs14 programs including Cotton, Eco, Quick, Delicates
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-FloodAutomatic water shut-off protection
DisplayLED with time remaining and cycle indicators
DoorReversible (opens left or right)
Dimensions (HxWxD)85 x 60 x 55 cm

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Level the machine: Adjust front feet using wrench; ensure machine is stable.
  3. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine.
  4. Connect drain hose: Place in standpipe or sink (max height 100 cm).
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Check installation: Ensure hoses are secure, machine is level.
  2. Run empty wash: Select Cotton 90°C program without laundry to clean drum.
  3. Set preferences: Use OPTIONS button to set beep volume, end signal.
  4. Load detergent: Fill dispenser compartments as per detergent instructions.

CAUTION! Use only HE (High Efficiency) detergent to prevent excess suds.

Specifications

Controls and Settings

Control Panel: POWER button, program selector knob, START/PAUSE, OPTIONS, delay timer button, spin speed button, temperature button.

Program Knob: Turn to select program (Cotton, Synthetics, Delicates, Quick, Wool, etc.).

Options: Pre-wash, Extra rinse, Anti-crease, Intensive. Delay Timer: Set 1-24 hours. Spin Speed: Adjustable (400, 600, 800, 1000, 1200 RPM, Rinse Hold). Temperature: Cold, 20°C, 30°C, 40°C, 60°C, 90°C. Child Lock: Press and hold OPTIONS + SPIN for 3 seconds.

Connecting Water & Drain

Water Inlet: Connect blue hose to cold water tap. Drain: Place hose in standpipe (max height 100 cm, min 60 cm).

  1. Turn off water tap before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Ensure drain hose is not kinked or submerged.

Tip: Check for leaks after first connection by running a short cycle.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 7 kg; distribute evenly.
  2. Add detergent: Fill compartments I (pre-wash), II (main wash), * (softener).
  3. Select program: Turn knob (e.g., Cotton for linens).
  4. Adjust settings: Temperature, spin speed, options if needed.
  5. Start: Press START/PAUSE; door locks automatically.
  6. Pause/Add: Press START/PAUSE to stop; wait 2 minutes to add items.
  7. End: Machine beeps; turn POWER off; remove laundry promptly.

WARNING! Do not open door during wash; wait until unlocked symbol appears.

Special Functions

Delay Timer: Postpone start up to 24 hours. Child Lock: Locks controls (press OPTIONS + SPIN 3 sec). Anti-Crease: Tumbles intermittently after cycle to reduce wrinkles. Extra Rinse: Adds rinse for sensitive skin. Intensive: For heavily soiled items.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and filter.

  1. Detergent drawer: Pull out, rinse under water.
  2. Door seal: Wipe with damp cloth to remove lint.
  3. Filter: Turn drain pump filter cap anti-clockwise, clean debris.
  4. Drum: Run Cotton 90°C program empty with washing machine cleaner.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Labeling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.eu or contact Hotpoint Customer Service at 08448 224 224 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check plug/power; press START/PAUSE.
No water intakeTaps closed/hose kinkedOpen water taps; check hose for kinks; clean inlet filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet for level.
Water not drainingDrain hose/blocked filterCheck hose height; clean pump filter.
Error codes (e.g., F01)Various faultsConsult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 08448 224 224; www.hotpoint.eu

Hotpoint Washing Machine WMF 760 P Manual © - All Rights Reserved 2025