Hotpoint Washing Machine WMF 760 G Manual

The Hotpoint WMF 760 G is a freestanding washing machine with a 7kg load capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1400 rpm, delay timer, child lock, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7 kg maximum load
Spin Speed	Up to 1400 rpm (adjustable)
Energy Class	A (energy efficient)
Programs	15 wash programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Display	Digital display showing time, cycle, and options
Door	Reversible for left/right opening
Dimensions (HxWxD)	850 x 600 x 540 mm
Water Pressure	0.5 - 10 bar

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Select maintenance cycle: Choose "Drum Clean" or run a 90°C cotton cycle without laundry.
Add detergent: Use 1/2 cup of washing machine cleaner or detergent.
Set child lock if needed: Press and hold CHILD LOCK for 3 seconds.
Test programs: Run a quick cycle to ensure proper operation.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: WMF 760 G
Type: Freestanding front-load washing machine
Capacity: 7 kg (dry weight)
Spin Speed: 1400 rpm (variable)
Energy Rating: A
Water Consumption: Approx. 50 liters per cycle (cotton 60°C)
Power Supply: 230-240V, 50Hz, 10A
Noise Level: Wash: 56 dB, Spin: 76 dB
Programs: 15 including Eco, Wool, Sport, Jeans
Dimensions: 85 x 60 x 54 cm (HxWxD)
Weight: 68 kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTION buttons, DELAY TIMER, CHILD LOCK.

Programs: Cotton (20°C-90°C), Synthetic (30°C-60°C), Delicate, Wool, Quick Wash (30 min), Eco 40-60, Drum Clean.

Options: Extra Rinse, Pre-wash, Reduced Creases, Speed Wash, Half Load. Settings: Spin speed (400-1400 rpm), Temperature (cold to 90°C), Delay (1-24h). Display: Shows time remaining, cycle stage, selected options.

Connecting Water & Drain

Water Inlet: Cold water connection (hot optional). Drain: Hose to standpipe or sink.

Turn off water supply before connecting hoses.
Use supplied hoses; do not reuse old ones.
Ensure drain hose is secured (not submerged in water).
Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select appropriate program for fabric type.

Load laundry: Do not exceed 7 kg; distribute evenly.
Add detergent: Use dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn selector to desired cycle.
Start: Press START/PAUSE; door locks automatically.
End of cycle: Signal sounds; door unlocks after short delay.
Unload: Remove laundry promptly to avoid creases.

WARNING! Do not open door during wash; wait for unlock symbol.

Special Functions

Delay Timer: Set wash to start later (1-24h). Child Lock: Press and hold for 3 sec to lock controls. Half Load: Reduces water for smaller loads. Extra Rinse: Adds rinse cycle for sensitive skin. Reduced Creases: Gentle final spin and extended tumbling.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and filter.

Unplug machine before cleaning.
Wipe exterior with damp cloth; no abrasive cleaners.
Clean dispenser: Remove and rinse under water.
Clean filter: Open flap at front right; place towel; unscrew filter; clear debris.
Run Drum Clean cycle every 30 washes.

CAUTION! Do not use harsh chemicals; keep area dry.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Disposal: Follow local regulations for WEEE. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START.
No water intake	Taps/hoses	Ensure taps open; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose position; clean pump filter; remove blockage.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine; redistribute load.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 min; restart.
Leaking water	Hoses/seal	Tighten connections; check door seal for debris; replace if damaged.

Reset: Unplug for 5 minutes, then restart.

Service: +44 (0) 344 822 4224; www.hotpoint.eu/support