Hotpoint washing machine WMF 760 A manual

The Hotpoint WMF 760 A is a freestanding washing machine with a 7kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 rpm, delay timer, child lock, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet, power cord.

Feature	Description
Capacity	7kg (dry laundry weight)
Spin Speed	Up to 1200 rpm (adjustable)
Energy Class	A (energy efficient)
Programs	Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	LED indicators for cycle progress
Door Lock	Automatic during operation
Water Inlet	Hot & cold water connections
Dimensions (HxWxD)	850 x 600 x 550 mm

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water supply: Attach hoses to hot/cold taps (if applicable); ensure tight connections.
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first use, run a maintenance wash.

Check installation: Ensure machine is level, hoses secure.
Power on: Plug in and press power button.
Run empty wash: Select Cotton program at 90°C without laundry.
Set preferences: Adjust default spin speed, temperature if desired via control panel.
Load detergent: Fill dispenser compartments as per detergent instructions.

CAUTION! Use only HE (High Efficiency) detergent to prevent excess suds.

Specifications

Model: WMF 760 A
Capacity: 7 kg
Spin Speed: 1200 rpm (variable)
Energy Rating: A
Water Consumption: Approx. 50 liters per cycle (cotton 60°C)
Programs: 12 programs including Eco, Quick, Wool, Delicates
Noise Level: Washing: 56 dB; Spinning: 76 dB
Power Supply: 220-240V, 50Hz, 10A
Dimensions: 850 x 600 x 550 mm (HxWxD)
Weight: 68 kg

Controls and Settings

Control Panel: POWER button, program selector knob, temperature button, spin speed button, delay timer button, start/pause button.

Programs: Cotton (40°C, 60°C, 90°C), Synthetics, Delicates, Wool, Quick Wash (30 min), Eco 40-60, Sport, Jeans, Rinse & Spin, Drain Only.

Settings: Temperature selection (cold to 90°C), spin speed (0 to 1200 rpm), delay timer (1-24 hrs), child lock (press and hold buttons for 3 sec). Display: Shows time remaining, cycle stage, and selected options.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (red for hot, blue for cold if using both). Drain: Place hose in standpipe (max height 100 cm) or over sink edge.

Turn off water taps before connecting hoses.
Use only supplied hoses; replace if damaged.
Ensure drain hose is not kinked.
Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Follow fabric care labels; sort laundry by color and fabric type.

Load laundry: Open door, load loosely; do not overload.
Add detergent: Pour into main wash compartment (II); pre-wash detergent in compartment I if needed.
Select program: Turn knob to desired program (e.g., Cotton).
Adjust settings: Press temperature/spin buttons to modify.
Start: Press start/pause; door locks automatically.
After cycle: Wait for door unlock signal; remove laundry promptly.
Delay timer: Press delay button to set start time (LED shows hours).

WARNING! Do not open door during wash; wait for unlock indicator.

Care & Maintenance

Clean regularly to ensure performance and longevity.

Dispenser: Pull out drawer; rinse under warm water.
Door seal: Wipe with damp cloth; remove debris.
Drum: Run empty hot wash monthly with washing machine cleaner.
Filter: Locate at front bottom; turn drain cap slowly to release water; clean filter.
Exterior: Wipe with soft, damp cloth; no abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use steam cleaners.

Safety Features

Child Lock: Prevents program changes; activate by holding temperature and spin buttons. Door Lock: Automatically locks during wash; unlocks at end. Overflow Protection: Auto shut-off if excess water detected. Imbalance Control: Reduces spin speed if load is uneven.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press start.
No water intake	Taps/hoses	Ensure taps on; hoses not kinked; filter clean.
Water doesn't drain	Drain hose/filter	Check hose for kinks; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 min, retry.
Detergent not dispensed	Dispenser clogged	Clean dispenser drawer and compartments.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.eu