Hotpoint Washing Machine WMF 740 P Manual

The Hotpoint WMF 740 P is a freestanding washing machine with a 7kg load capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1400 rpm, delay start, child lock, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7kg (dry laundry weight)
Spin Speed	Up to 1400 rpm (adjustable)
Energy Rating	Class A (energy efficient)
Programs	Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	Digital with time remaining and cycle indicators
Door	Reversible for left/right opening
Water Inlet	Hot & cold fill options
Dimensions (HxWxD)	850 x 600 x 540 mm

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn clockwise to raise, anti-clockwise to lower; ensure machine is level.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine inlet valves.
Connect drain hose: Place in standpipe or hook over sink edge (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing. Ensure all connections are secure and leak-free.

First-Time Setup

Before first use, run a maintenance wash.

Check installation: Ensure machine is level, transit bolts removed, hoses connected.
Power on: Plug in and press POWER button.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use OPTIONS button to adjust default spin speed, temperature if needed.
Load laundry: Do not exceed 7kg; distribute evenly.

CAUTION! Overloading can cause imbalance and damage. Use correct detergent type and amount.

Specifications

Model: Hotpoint WMF 740 P
Capacity: 7 kg
Spin Speed: 1400 rpm (max)
Energy Class: A
Water Pressure: 0.5 - 10 bar
Power Supply: 230-240V ~ 50Hz
Power Consumption: 2100 W (max)
Programs: 15 including Eco, Cotton, Synthetics, Delicates, Wool, Quick Wash (30°C), Sport, Jeans, Anti-Allergy, Drum Clean.
Noise Level: Wash: 56 dB, Spin: 76 dB
Dimensions: 850 x 600 x 540 mm (HxWxD)

Controls and Settings

Control Panel: POWER button, Program selector knob, START/PAUSE, OPTIONS (spin speed, temperature, extra rinse), DELAY START, CHILD LOCK.

Display Icons: Time remaining, spin speed, temperature, delay start, child lock, door locked.

Program Selection: Turn knob to desired program (Cotton, Synthetics, etc.). Options: Press OPTIONS to adjust spin speed (0-1400 rpm), temperature (cold-90°C), and add extra rinse. Delay Start: Press DELAY to set start time (1-24 hours). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps and machine (red: hot, blue: cold). Drain: Place hose in standpipe or over sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not extend or repair.
Drain hose must not be kinked or submerged.
After connection, open taps fully and check for leaks.

Tip: Use drain hose support if provided to secure position.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load evenly, close securely.
Add detergent: Pour into dispenser compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
Adjust options: Press OPTIONS to set temperature, spin speed, extra rinse.
Start: Press START/PAUSE; door locks and cycle begins.
Pause/Stop: Press START/PAUSE to pause; turn knob to OFF to cancel.
End of cycle: Door unlocks; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash; wait for unlock symbol. Remove coins, keys from pockets.

Special Functions

Delay Start: Set wash to start later (1-24 hours). Child Lock: Prevents program changes during cycle. Extra Rinse: Adds rinse for sensitive skin. Reduced Creases: For synthetics, reduces spin speed to minimize wrinkles. Drum Clean: Monthly program to clean drum and prevent odors.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly: remove drawer, rinse under tap. Clean door seal: wipe rubber gasket to remove lint/debris. Run Drum Clean program monthly with washing machine cleaner.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

CE marked; complies with EU directives. Waste disposal: Dispose of packaging and old machine per local regulations. Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug, power outlet; ensure door closed properly.
No water intake	Taps/hoses/filter	Ensure taps on; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/pump	Check hose for kinks/blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/load/leveling	Ensure transit bolts removed; redistribute load; re-level machine.
Error codes (e.g., F01, F02)	Various faults	Consult manual error code list; unplug for 5 mins, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk