Hotpoint Washing Machine WMF 740 K Manual

The Hotpoint WMF 740 K is a freestanding washing machine with a 7 kg load capacity, 1400 rpm spin speed, energy rating A+++, and multiple wash programs including Cotton, Synthetics, Delicates, Wool, Quick Wash, and Eco cycles. It features a digital display, delay timer, child lock, anti-flood protection, and adjustable temperature settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, door with safety lock, water inlet valves, drain pump filter, and adjustable feet.

Feature	Description
Load Capacity	7 kg (dry laundry)
Spin Speed	Up to 1400 rpm
Energy Rating	A+++ (most efficient)
Digital Display	Shows time, cycle, and settings
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood Protection	Automatic water shut-off in case of leak detection
Detergent Drawer	Compartments for pre-wash, main wash, and softener
Quick Wash	30-minute cycle for lightly soiled loads
Eco Program	Reduces energy and water consumption

Installation

Unpack and remove transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine inlets.
Connect drain hose: Place in standpipe or sink; ensure no kinks.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; run initial empty wash cycle.

Set language: Press and hold START/PAUSE and TEMP buttons for 3 seconds to select language.
Run cleaning cycle: Select Cotton 90°C program without laundry to clean drum.
Adjust default settings: Use OPTIONS button to set beep volume, end signal, etc.
Load detergent: Fill compartments as per detergent manufacturer instructions.

CAUTION! Ensure all packaging and transit bolts are removed before first use.

Specifications

Model: WMF 740 K
Capacity: 7 kg
Spin Speed: 1400 rpm (adjustable)
Energy Class: A+++
Water Consumption: Approx. 45 liters per cycle (Cotton 60°C)
Power Supply: 230-240V, 50Hz
Dimensions (HxWxD): 85 x 60 x 60 cm
Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, Eco, Rinse & Spin, Drain
Noise Level: Washing: 53 dB; Spinning: 73 dB
Weight: 68 kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, TEMPERATURE, SPIN SPEED, OPTIONS, DELAY START, CHILD LOCK, START/PAUSE.

Display Icons: Time remaining, temperature, spin speed, delay timer, child lock, door locked.

Program Selection: Turn knob to desired program (Cotton, Synthetics, etc.). Temperature: 20°C to 90°C or cold. Spin Speed: 400 to 1400 rpm or no spin. Options: Extra rinse, pre-wash, stain removal. Delay Start: Set 1-24 hours. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual supply). Drain: Secure hose to standpipe or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Drain hose height: 60-100 cm from floor.
Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor or above living spaces.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7 kg; distribute evenly.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Adjust settings: Set temperature, spin speed, options.
Start: Press START/PAUSE; door locks automatically.
Pause/Add: Press START/PAUSE to stop; wait for door unlock to add items.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

Delay Start: Set delay before wash begins. Child Lock: Prevents changes during cycle. Extra Rinse: Adds rinse for sensitive skin. Pre-wash: For heavily soiled loads. Stain Removal: Optimizes wash for specific stains (select via OPTIONS).

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Remove and rinse under warm water.
Door seal: Wipe with damp cloth; remove debris.
Filter: Turn off machine; open filter cover at front; place towel; unscrew filter cap; clean.
Drum: Run Cotton 90°C cycle empty with washing machine cleaner.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on door or display.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center. Serial number located on door frame or rear panel.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check hose height/blockage; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Error codes (e.g., F01)	Various faults	Consult manual error code list; unplug for 5 minutes; restart.

Reset: Unplug for 5 minutes; plug back in.

Service: Contact authorized Hotpoint service; provide model and serial number.