Hotpoint Washing Machine WMF 740 G Manual

The Hotpoint WMF 740 G is a 7kg capacity front-loading washing machine with energy rating A+++, 1400 RPM spin speed, multiple wash programs, delay timer, child lock, and anti-flood protection. Features include electronic display, touch controls, quick wash cycles, and anti-allergy options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent drawer, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7 kg maximum load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Display	LED digital display with time remaining
Programs	15 wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Anti-Flood Protection	Automatic water shut-off in case of leak detection
Door Lock	Automatic safety lock during operation
Dimensions	85cm H x 60cm W x 54cm D

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Level machine using adjustable feet; ensure no rocking.
Connect water supply: Attach inlet hose to cold water tap (3/4" thread).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before first use.

First-Time Setup

Power on machine; run initial setup cycle.

Remove packaging materials: Check drum for foam blocks or tape.
Run empty wash: Select "Cotton 90°C" program without laundry to clean interior.
Set language: Press and hold "Temp" + "Spin" for 3 seconds to select language.
Test functions: Verify water inlet, drain, and spin operation.

CAUTION! Ensure water connections are tight to prevent leaks. Check drain hose is not kinked.

Specifications

Model: WMF 740 G
Capacity: 7 kg (dry weight)
Spin Speed: 1400 RPM (adjustable)
Energy Consumption: 0.95 kWh per cycle (Cotton 60°C)
Water Consumption: 45 liters per cycle (average)
Noise Level: 53 dB (wash), 75 dB (spin)
Programs: 15 including Eco 40-60, Wool, Sport, Anti-Allergy
Dimensions: 85 x 60 x 54 cm (HxWxD)
Weight: 68 kg
Power Supply: 220-240V, 50Hz, 10A

Controls and Settings

Control Panel: Power button, Program selector, Temperature button, Spin speed button, Delay start, Start/Pause.

Display Symbols: Door locked, Child lock active, Delay time, Water tap, Drain, Spin.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, etc.). Temperature: Press Temp button to select 30°C-90°C or cold. Spin Speed: Press Spin button to select 400-1400 RPM or no spin. Options: Delay start (1-24h), Extra rinse, Pre-wash, Rapid (reduces time). Child Lock: Press and hold Delay + Spin for 3 seconds.

Connecting Water & Drain

Water Inlet: Cold water only connection. Drain: To standpipe or sink.

Turn off water supply before connecting hoses.
Connect inlet hose to machine first, then to tap (hand-tighten only).
Place drain hose in standpipe (max 100cm height) or over sink edge.
Secure drain hose with provided hook.

Tip: Leave drain hose looped to prevent sink water backflow.

Using Wash Programs

Supports various fabric types and soil levels.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn knob (e.g., Cotton for towels/bed sheets).
Adjust settings: Temp, spin speed, options as needed.
Start: Press Start/Pause; door locks automatically.
After wash: Wait for door lock symbol to disappear before opening.
Unload: Remove laundry promptly to prevent wrinkles.

WARNING! Do not open door during wash; hot water may cause burns. Check pockets for objects.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Locks controls. Anti-Allergy: Extra rinse and higher temperature to reduce allergens. Quick Wash: 30-minute cycle for lightly soiled loads. Eco 40-60: Energy-efficient program for 40°C-60°C washes.

Care & Cleaning

Monthly maintenance: Run "Drum Clean" program at 90°C without laundry. Clean detergent drawer: Remove and rinse under water. Clean door seal: Wipe rubber gasket to remove lint/debris. Clean filter: Locate behind lower panel; turn counterclockwise to remove and clean.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on door or drum.

Regulatory Information

CE certified. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check power plug; press Start.
No water intake	Tap closed/hose kinked	Open water tap; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain blocked/filter clogged	Check drain hose; clean pump filter.
Excessive vibration	Transit bolts not removed/uneven load	Remove transit bolts; redistribute laundry; level feet.
Error codes (E01-E10)	Various faults	Consult manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.eu