Hotpoint Washing Machine WMF 740 A Manual

The Hotpoint WMF 740 A is a freestanding front-loading washing machine with a 7kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1400 RPM, delay timer, child lock, and various fabric care options. Designed for standard household use with 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	7kg (dry laundry weight)
Spin Speed	Up to 1400 RPM
Energy Rating	Class A
Programs	15+ wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Display	LED digital display with time remaining
Door Lock	Automatic safety lock during operation
Water Inlet	Hot & cold water connections
Dimensions	85cm H x 60cm W x 54cm D

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; ensure machine is stable.
Connect water supply: Attach hoses to hot/cold taps; use supplied washers.
Connect drain hose: Place in standpipe or sink (max height 100cm).
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Check installation: Ensure transit bolts removed, machine level, hoses connected.
Power on: Plug in and press POWER button.
Run empty wash: Select Cotton 90°C program without laundry to clean drum.
Set preferences: Use OPTIONS button to set beep volume, default spin speed.
Load detergent: Fill compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Never use machine without removing transit bolts—risk of severe damage.

Specifications

Model: WMF 740 A
Capacity: 7kg
Max Spin Speed: 1400 RPM
Energy Class: A
Water Pressure: 0.5-10 bar
Power Supply: 220-240V, 50Hz
Programs: Cotton, Eco Cotton, Synthetics, Delicates, Wool, Hand Wash, Quick Wash (30°C), Sportswear, Anti-Allergy, Drum Clean, Spin Only, Rinse & Spin
Noise Level: Wash 56 dB, Spin 76 dB
Weight: 68kg
Warranty: 2 years parts and labor

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM knob, OPTIONS, DELAY START, CHILD LOCK.

Display Symbols: Wash cycle, temperature, spin speed, time remaining, delay timer, child lock, door locked.

Program Selection: Turn knob to desired program (Cotton, Synthetics, etc.). Options: Press OPTIONS to adjust temperature (30-90°C), spin speed (0-1400 RPM), extra rinse, pre-wash. Delay Start: Set 1-24 hours delay. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water Supply

Requires cold water connection (mandatory) and hot water (optional).

Turn off water taps.
Connect hoses: Red to hot tap, blue to cold tap (if available).
Use supplied washers; tighten by hand, then quarter turn with pliers.
Open taps slowly; check for leaks.
Ensure drain hose is secured (not submerged).

Tip: Use only supplied hoses; replace if damaged. Do not overtighten.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7kg; distribute evenly.
Add detergent: Use compartments I (pre-wash) and II (main wash).
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Adjust options: Temperature, spin speed, extra rinse if needed.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to pause; wait for door unlock symbol.
End of cycle: Machine beeps; door unlocks after short delay.

WARNING! Do not open door during wash/spin—hot water and high speed risk.

Special Functions

Delay Start: Set 1-24 hours delay for automatic start. Child Lock: Prevents program changes during wash. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled items. Drum Clean: Run monthly with detergent to prevent odors.

Care & Maintenance

Monthly: Run Drum Clean program at 90°C with washing machine cleaner. Clean detergent drawer and door seal regularly. Check drain filter every 3 months.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on door/drum.

Regulatory Information

CE compliant. Meets EU energy efficiency and safety standards. Manufactured under ISO 9001. Disposal: Follow local WEEE regulations. For support, visit www.hotpoint.com or contact 0344 822 4224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water not draining	Drain hose/filter	Check hose position; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine.
Error codes (E01-E10)	Various faults	Refer to manual error code list; reset by unplugging 5 minutes.
Leaking water	Hoses/seal	Tighten connections; check door seal for debris.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.com