Hotpoint Washing Machine WMEUF 722P UK Manual

The Hotpoint WMEUF 722P is a freestanding 7kg capacity washing machine with an A+++ energy rating, featuring 1200 RPM spin speed, 15 wash programmes including Eco 40-60, Quick Wash, and Delicates, a delay timer up to 24 hours, child lock, and a large LED display. Designed for UK households, it offers efficient cleaning with low water and energy consumption. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programmes 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum, LED control panel, detergent dispenser, filter access, adjustable feet, water inlet hoses, drain hose.

FeatureDescription
Capacity7kg (dry laundry weight)
Energy RatingA+++ (most efficient)
Spin Speed1200 RPM (adjustable)
Wash Programmes15 programmes including Cotton, Synthetics, Delicates
Delay TimerUp to 24 hours
Child LockPrevents accidental programme changes
DisplayLED with time remaining indicator
Quick Wash30-minute programme for lightly soiled loads
Eco 40-60Energy-saving programme for 40°C and 60°C washes
Door LockAutomatic safety lock during operation

Installation

Unpack and remove transit bolts. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if required (red marker).
  3. Connect drain hose: Place in standpipe or sink (max height 100cm).
  4. Level the machine: Adjust front feet using spanner; check with spirit level.
  5. Plug into 220-240V AC, 50Hz socket with earthing.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Plug in and press POWER button.
  2. Run empty wash: Select Cotton programme at 90°C without laundry.
  3. Set preferences: Use OPTIONS button to adjust spin speed, temperature, etc.
  4. Load detergent: Add to appropriate compartments (I: pre-wash, II: main wash, *: softener).
  5. Start cycle: Close door and press START/PAUSE.

CAUTION! Ensure packaging materials and transit bolts are fully removed.

Specifications

Controls and Settings

Control Panel: POWER button, programme selector knob, OPTIONS buttons (Temp, Spin, Delay), START/PAUSE, child lock.

Programme Knob: Select from Cotton (40°C-90°C), Synthetics, Delicates, Wool, Hand Wash, Quick 30’, Eco 40-60, Sport, Jeans, Mix, Rinse & Spin, Drain, Drum Clean.

Options: Adjust temperature (cold to 90°C), spin speed (0-1200 RPM), delay timer (1-24 hrs). Display: Shows time remaining, selected options, and error codes. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe or sink.

  1. Ensure water taps are off before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Secure drain hose to prevent slipping; max height 100cm.
  4. Check for leaks after first connection.

Tip: Leave a small gap between machine and wall for hose movement.

Using Wash Programmes

Select programme based on fabric type and soil level.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Use compartments I (pre-wash), II (main wash), * (softener).
  3. Select programme: Turn knob to desired programme (e.g., Cotton).
  4. Adjust options: Press TEMP, SPIN, DELAY to modify settings.
  5. Start: Close door, press START/PAUSE. Display shows time remaining.
  6. Pause/change: Press START/PAUSE to pause; change options only if allowed.
  7. End of cycle: Door unlocks; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during spin cycle. Wait for door lock light to go off.

Special Functions

Delay Timer: Set 1-24 hours to start later. Child Lock: Prevents accidental changes. Drum Clean: Run monthly with detergent to maintain hygiene. Extra Rinse: Adds rinse cycle for sensitive skin.

Care & Cleaning

Regular maintenance ensures longevity.

  1. Clean detergent drawer: Remove and rinse monthly.
  2. Clean filter: Locate at front bottom; turn anti-clockwise to remove; clear debris.
  3. Clean door seal: Wipe with damp cloth to remove lint and residue.
  4. Run Drum Clean: Monthly with hot wash (90°C) or dedicated cleaner.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016 and EU Ecodesign Directive. Energy label class A+++. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 225 225.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug socket; ensure door closed properly; press START/PAUSE.
No water intakeTaps/hoses/filterEnsure taps on; check hoses for kinks; clean inlet filter.
Water leaksHoses connectionsTighten hose connections; check drain hose position.
Excessive vibrationTransit bolts/levelEnsure transit bolts removed; adjust feet to level machine.
Poor washing resultsDetergent/loadingUse correct detergent amount; do not overload; select proper programme.
Error codes (e.g., F01)Various faultsConsult manual error code list; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 225 225; www.hotpoint.co.uk

Hotpoint Washing Machine WMEUF 722P UK Manual © - All Rights Reserved 2025