Hotpoint Washing Machine WMD 940 P Manual

The Hotpoint WMD 940 P is a freestanding washing machine with a 9 kg load capacity, 1400 rpm spin speed, energy rating A+++, and multiple wash programs including Cotton, Synthetics, Delicates, Wool, Quick Wash, and Eco cycles. It features a digital display, delay timer, child lock, anti-flood system, and imbalance detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, door with safety lock, water inlet valves, drain pump filter, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 rpm
Energy Rating	A+++ (most efficient)
Display	Digital LED with time remaining
Programs	14 programs including Cotton, Eco, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood System	Automatic water shut-off protection
Imbalance Detection	Auto-adjusts spin to reduce vibration
Door Lock	Safety lock during operation

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; ensure machine is stable.
Connect water inlet: Attach hoses to cold water tap (blue marker) and hot if used (red marker).
Connect drain hose: Place in standpipe or sink edge; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Check installation: Ensure hoses are secure, drain is clear, machine is level.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use OPTIONS button to set beep volume, end signal, default spin speed.
Load detergent: Fill drawer compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Use only HE (High Efficiency) detergent to avoid excess suds.

Specifications

Model: WMD 940 P
Capacity: 9 kg (cotton)
Spin Speed: 1400 rpm (adjustable)
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 230-240V ~ 50Hz
Power Consumption: 2100 W (heating)
Programs: 14 including Cotton, Synthetics, Delicates, Wool, Quick 30', Eco 40-60
Noise Level: Wash 53 dB, Spin 75 dB
Weight: 70 kg

Controls and Settings

Control Panel: POWER button, Program dial, START/PAUSE, OPTIONS, Delay Timer (+/-), Spin Speed button, Temperature button.

Display Icons: Door Lock, Child Lock, Delay Start, Spin Speed, Temperature, Time Remaining.

Program Selection: Turn dial to desired program (Cotton, Synthetics, Delicates, Wool, Quick Wash, Eco, etc.). Options: Press OPTIONS to toggle extra rinse, pre-wash, intensive, stain removal. Temperature: Select 20°C to 90°C or cold. Spin Speed: Select 400 to 1400 rpm or Rinse Hold. Delay Timer: Set 1-24 hours delay start.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (cold mandatory, hot optional). Drain: Place hose in standpipe (max height 100 cm) or sink.

Turn off taps before connecting hoses.
Use only supplied hoses; replace if damaged.
Ensure drain hose is not kinked and is secured.
Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use drawer compartments; follow dosage instructions.
Select program: Turn dial (e.g., Cotton for towels/bed linen).
Adjust settings: Set temperature, spin speed, options if needed.
Start: Press START/PAUSE; door locks automatically.
Pause/Add: Press START/PAUSE to pause; wait for door unlock to add items.
End: Machine beeps; turn dial to OFF; remove laundry promptly.

WARNING! Do not open door during spin. Wait for door lock light to go off.

Special Functions

Child Lock: Press and hold OPTIONS + SPIN SPEED for 3 seconds to lock controls. Delay Start: Set 1-24 hours delay. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled loads. Intensive: Longer wash for stains. Rinse Hold: Stops with water in drum for easy hand rinsing.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, drum, and filter.

Detergent drawer: Pull out, rinse under water, dry, reinsert.
Door seal: Wipe with damp cloth; remove debris from folds.
Drum: Run empty Cotton 90°C program with washing machine cleaner.
Filter: Turn off machine; open filter cover at front bottom; place towel; unscrew filter; clean; reinsert.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Label regulations. Waste disposal: Follow local regulations; contact municipal waste service. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4422.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug/power; press START.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain blocked/filter	Check drain hose for blockage; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute load; level feet.
Error codes (E01-E10)	Various faults	Consult manual error code list; unplug for 5 minutes; retry.

Reset: Unplug for 5 minutes; plug back in.

Service: +44 (0) 344 822 4422; www.hotpoint.eu/service