Hotpoint washing machine WMD 940 K manual

The Hotpoint WMD 940 K is a freestanding washing machine with a 9 kg load capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1400 rpm, delay timer, child lock, and anti-flood protection. It includes a digital display, rotary program selector, and options for temperature, spin speed, and extra functions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, door, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 rpm (adjustable)
Energy Rating	A+++ (most efficient)
Programs	Cotton, Synthetics, Delicates, Wool, Quick Wash, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Flood	AquaStop protection system
Display	Digital with time remaining, cycle info
Door	Reversible for left/right opening
Noise Level	Low noise operation (washing: 53 dB, spinning: 75 dB)

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (blue) and hot if available (red).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Check installation: Ensure machine is level, hoses secure.
Run empty wash: Select Cotton program at 90°C without laundry.
Set preferences: Use OPTIONS button to set beep volume, default spin speed.
Load detergent: Fill compartments I (pre-wash), II (main wash), * (fabric softener).

CAUTION! Never use machine without removing transit bolts—risk of damage.

Specifications

Model: WMD 940 K
Capacity: 9 kg (cotton)
Dimensions (HxWxD): 85 x 60 x 60 cm
Spin Speed: 1400 rpm (variable)
Energy Consumption: 0.95 kWh per cycle (cotton 60°C)
Water Consumption: 52 liters per cycle (cotton 60°C)
Programs: 15 programs including Eco, Sport, Anti-Allergy
Voltage: 220-240V, 50Hz
Max Inlet Pressure: 1 MPa (10 bar)
Min Inlet Pressure: 0.05 MPa (0.5 bar)

Controls and Settings

Control Panel: Rotary selector for programs, START/PAUSE button, OPTIONS button, digital display.

Programs: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (cold-40°C), Wool, Quick Wash (30 min), Eco 40-60, Spin/Drain, Rinse.

Options: Temperature selection (cold to 90°C), Spin speed (0-1400 rpm), Extra Rinse, Delay Start (1-24h), Pre-Wash, Speed Wash.

Display icons: Door locked, child lock, delay start active, end of cycle.

Connecting Water & Drain

Water inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Secure hose to standpipe or sink.

Ensure taps are off before connecting hoses.
Use supplied hoses only; do not reuse old ones.
Drain hose must not be kinked or submerged.
Check for leaks after first connection.

Tip: Install AquaStop hose (if included) for extra flood protection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use compartments I, II, * as needed.
Select program: Turn knob to desired program.
Set options: Adjust temperature, spin speed, extra functions.
Start: Press START/PAUSE; door locks automatically.
Pause: Press START/PAUSE to stop; door unlocks after 2 minutes if water level is low.
End of cycle: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during wash; hot water risk. Wait for unlock signal.

Special Functions

Delay Start: Set 1-24 hours; machine starts automatically. Child Lock: Press and hold OPTIONS for 3 seconds to lock controls. Anti-Allergy: Extra rinse and higher temperature for sensitive skin. Speed Wash: Reduces cycle time for lightly soiled loads.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Detergent drawer: Remove and rinse under water.
Door seal: Wipe with damp cloth; remove debris.
Filter: Turn drain pump cap counterclockwise; clean filter of lint/coins.
Run maintenance wash: Empty drum, 90°C cotton program with washing machine cleaner.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on door or drum.

Regulatory Information

CE compliant; meets EU energy labeling and Ecodesign requirements. Waste electrical products must not be disposed of with household waste; recycle according to local regulations. For support, visit www.hotpoint.eu or contact 08448 224 224 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power outlet; press START.
No water intake	Taps off/hose kinked	Open taps; check hose for kinks; clean inlet filter.
Water leaks	Loose connections	Tighten hoses; check door seal for debris; ensure detergent drawer closed.
Excessive vibration/noise	Transit bolts/uneven load	Ensure transit bolts removed; redistribute laundry; level feet.
Poor washing results	Detergent/dosage	Use correct detergent type; follow dosage instructions; clean dispenser.
Display shows error code	Fault detected	Consult manual for code meaning (e.g., F01 = drain issue); check filter.

Reset: Unplug for 1 minute, then restart.

Service: 08448 224 224; www.hotpoint.eu