Hotpoint Washing Machine WMD 863 Manual

The Hotpoint WMD 863 is a freestanding washing machine with a large 8kg capacity, 1400 RPM spin speed, energy rating A+++, and multiple wash programs including Cotton, Synthetic, Delicate, Wool, Quick Wash, and Eco cycles. Features include a digital display, delay timer, child lock, anti-flood system, and anti-vibration design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door with safety lock, water inlet hoses, drain hose, adjustable feet.

FeatureDescription
Capacity8kg load capacity for large households
Spin SpeedUp to 1400 RPM for efficient drying
Energy RatingA+++ for low energy consumption
Digital DisplayShows time remaining, program, and settings
Delay TimerDelay start up to 24 hours
Child LockPrevents accidental program changes
Anti-Flood SystemProtects against water leaks
Anti-Vibration DesignReduces noise during spin cycles
Quick Wash30-minute cycle for lightly soiled items
Eco ProgramReduces water and energy usage

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove four bolts at rear; keep for future moves.
  2. Adjust feet: Turn clockwise to raise, counterclockwise to lower; ensure machine is level.
  3. Connect water inlet: Attach hoses to cold water tap (blue) and hot if available (red).
  4. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

  1. Set language: Press and hold START/PAUSE for 3 seconds to cycle through languages.
  2. Load detergent: Add powder/liquid to appropriate drawer compartments.
  3. Select program: Turn dial to Cotton 60°C.
  4. Run empty wash: Press START/PAUSE; let complete to clean drum.
  5. Set child lock: Press and hold CHILD LOCK button for 3 seconds if needed.

CAUTION! Ensure water connections are tight; check for leaks before first use.

Specifications

Controls and Settings

Control Panel: Program dial, digital display, START/PAUSE, OPTIONS, CHILD LOCK, DELAY START.

Program Dial: Select from Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Wool, Quick Wash (30 min), Eco (40°C), Rinse & Spin.

Options: Extra Rinse, Pre-Wash, Reduced Crease, Half Load. Settings: Delay Start (1-24 hours), Spin Speed (400-1400 RPM), Temperature (cold to 90°C). Child Lock: Press and hold 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100cm).

  1. Turn off taps before connecting hoses.
  2. Use only supplied hoses; do not overtighten.
  3. Ensure drain hose is not kinked or submerged.
  4. Check for leaks after connections.

Tip: Install drain hose at 60-100cm height for optimal drainage.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Load laundry: Do not exceed 8kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
  3. Select program: Turn dial to desired program.
  4. Adjust settings: Use OPTIONS for extra rinse, temperature, spin speed.
  5. Start: Press START/PAUSE; display shows time remaining.
  6. Pause: Press START/PAUSE to pause; door locks during wash.
  7. End of cycle: Signal sounds; door unlocks after 2 minutes.

WARNING! Do not open door during wash; wait for unlock signal. Remove items promptly to avoid creasing.

Special Functions

Delay Start: Set 1-24 hours for delayed start. Child Lock: Locks controls when activated. Half Load: Reduces water for small loads. Anti-Crease: Tumbles periodically after cycle to reduce wrinkles.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run empty hot wash with vinegar to clean drum.

CAUTION! Do not use abrasive cleaners; clean filter every 3 months to prevent blockages.

Regulatory Information

CE compliant; meets EU energy efficiency standards. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 0344 822 4224.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug is in; ensure door is closed properly; press START/PAUSE.
No water intakeTaps/hosesEnsure taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose/filterCheck hose for blockages; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet for level.
Error codes (E01-E10)Various faultsRefer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: 0344 822 4224; www.hotpoint.co.uk

Hotpoint Washing Machine WMD 863 Manual © - All Rights Reserved 2025