Hotpoint Washing Machine WMBF 944 Manual

The Hotpoint WMBF 944 is a freestanding washing machine with a 9kg capacity, 1400 RPM spin speed, energy rating A+++, and multiple wash programs including Cotton, Synthetic, Delicate, Wool, Quick Wash, and Eco cycles. Features include a digital display, delay timer, child lock, anti-crease function, and automatic load detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, detergent dispenser, drum light, filter access, adjustable feet, water inlet hoses, drain hose.

FeatureDescription
Capacity9kg maximum load
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (most efficient)
DisplayDigital with time remaining indicator
Programs14 programs including Cotton, Eco, Quick Wash
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-CreaseReduces wrinkles after wash
Load DetectionAutomatically adjusts water and time
Noise Level73 dB (wash), 78 dB (spin)

Installation

Unpack and remove transit bolts. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold and hot water taps (if applicable).
  3. Connect drain hose: Place in standpipe or sink (max height 100cm).
  4. Level the machine: Adjust feet using spanner; use spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Check installation: Ensure machine is level, hoses secure.
  2. Run empty wash: Select Cotton 90°C program without detergent.
  3. Set preferences: Use OPTIONS button to set beep volume, default spin speed.
  4. Load laundry: Do not exceed 9kg; mix large and small items.
  5. Add detergent: Use dispenser drawers (I: pre-wash, II: main wash, *: softener).

CAUTION! Overloading reduces wash efficiency and can cause damage.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR knob, START/PAUSE, OPTIONS, DELAY START, CHILD LOCK.

Display Icons: Time remaining, spin speed, temperature, delay start, child lock, door locked.

Program Selection: Turn knob to desired program. Options: Press OPTIONS to select extra rinse, pre-wash, speed wash. Temperature: Auto-set per program; adjust with TEMP button (20°C-90°C). Spin Speed: Adjust with SPIN button (0-1400 RPM). Delay Start: Set 1-24 hours delay. Child Lock: Press and hold CHILD LOCK for 3 seconds.

Connecting Water Supply

Cold fill only or dual fill (hot/cold). Use supplied hoses.

  1. Turn off water taps.
  2. Connect hoses: Blue marker to cold tap; red to hot (if dual fill).
  3. Secure with nuts; do not overtighten.
  4. Open taps fully; check for leaks.
  5. Ensure drain hose is not kinked.

Tip: Use only new hoses; replace every 5 years. Do not extend hoses.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Sort laundry: By color, fabric, soil level.
  2. Load machine: Do not exceed 9kg; leave space at top.
  3. Add detergent: Follow dosage on packet; use drawer I for pre-wash.
  4. Select program: Turn knob (e.g., Cotton for cottons, Synthetic for blends).
  5. Adjust settings: Temperature, spin speed, options as needed.
  6. Start: Press START/PAUSE; door locks automatically.
  7. After wash: Remove promptly; leave door ajar to dry drum.

WARNING! Do not wash items soaked in solvents, flammable liquids.

Special Functions

Delay Start: Set 1-24 hours; machine starts automatically. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled loads. Speed Wash: Reduces time for lightly soiled loads. Child Lock: Locks controls during wash. Anti-Crease: Tumbles periodically after wash to reduce wrinkles.

Care & Cleaning

Monthly maintenance ensures optimal performance.

  1. Clean detergent drawer: Remove, rinse under tap.
  2. Clean filter: Turn off machine; open filter cover at front; drain water into tray; remove debris.
  3. Clean drum: Run Drum Clean program monthly (without laundry).
  4. Wipe door seal: Remove lint, debris; dry after use.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label A+++. Manufactured by Hotpoint, a Haier company. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Serial number located on door frame.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check plug is in; press START/PAUSE.
No water intakeTaps off/hose kinkedOpen taps; check hose for kinks; clean inlet filter.
Water leaksHose connectionsTighten connections; check drain hose is secure.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; re-level machine.
Poor wash resultsOverloading/detergentReduce load; use correct detergent amount; clean dispenser.
Error codes (e.g., F01)Drain issue/door lockCheck drain hose; clean filter; restart machine.

Reset: Unplug for 5 minutes; plug back in.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint Washing Machine WMBF 944 Manual © - All Rights Reserved 2025