Hotpoint washing machine WMBF 742P UK.M manual

The Hotpoint WMBF 742P UK.M is a 7kg front-loading washing machine with an A+++ energy rating, 1400 RPM spin speed, and multiple wash programs including Cotton, Synthetics, Delicates, Wool, Quick Wash, and Eco cycles. It features a digital display, delay timer, child lock, anti-flood protection, and anti-vibration system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Digital Control Panel, Detergent Drawer, Water Inlet Valves, Drain Pump Filter, Adjustable Feet, Power Cord.

Feature	Description
Digital Display	Shows time remaining, cycle stage, and error codes
Detergent Drawer	Compartments for pre-wash, main wash, and fabric softener
Water Inlet Valves	For hot and cold water connections
Drain Pump Filter	Access for clearing blockages and draining residual water
Adjustable Feet	For levelling the machine on uneven floors
Child Lock	Locks control panel during operation
Delay Timer	Delays start of wash cycle up to 24 hours
Anti-Vibration System	Reduces noise and movement during spin
Quick Wash Program	30-minute cycle for lightly soiled loads
Eco 40-60	Energy-efficient cycle for 40°C and 60°C cotton loads

Installation

Unpack and remove all transit bolts and packaging. Place on solid, level floor.

Connect water supply: Attach inlet hoses to hot and cold taps (blue for cold, red for hot).
Connect drain hose: Place in standpipe or secure to sink edge (max height 100cm).
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into grounded power outlet.

WARNING! Remove all transit bolts before use to prevent serious damage. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; run initial empty wash cycle.

Remove transit bolts: Use spanner to remove four bolts from rear panel.
Connect utilities: Ensure water and drain connections are secure.
Run test cycle: Select Cotton 90°C program without laundry to clean drum.
Set preferences: Use control dial to select language, default temperature, spin speed.

CAUTION! Do not skip transit bolt removal. Keep packaging for possible returns.

Specifications

Capacity: 7kg dry laundry.
Energy Rating: A+++.
Spin Speed: Up to 1400 RPM.
Water Pressure: 0.5-10 bar.
Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, Eco 40-60, Rinse & Spin, Drain.
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Power Supply: 220-240V, 50Hz.
Noise Level: 53 dB (washing), 75 dB (spinning).

Controls and Settings

Control Panel: Program Dial, Start/Pause button, Delay Timer button, Option buttons (Temp, Spin, Extra Rinse).

Program Selection: Turn dial to desired wash program. Temperature: Adjust with Temp button (Cold to 90°C). Spin Speed: Adjust with Spin button (0 to 1400 RPM). Options: Extra Rinse, Pre-wash, Quick Wash. Delay Timer: Press Delay button to set start time (1-24 hours). Child Lock: Press and hold Start/Pause for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (ensure washers are fitted). Drain: Secure hose to standpipe or sink.

Turn off taps before connecting hoses.
Connect blue hose to cold tap, red to hot (if available).
Secure drain hose with provided U-bend holder.
Check for leaks by turning on taps briefly before first wash.

Tip: Leave small gap between drain hose end and standpipe water level to prevent siphoning.

Using Wash Programs

Supports various fabric types and soil levels.

Sort laundry: Separate by colour and fabric type.
Load machine: Do not exceed 7kg; distribute evenly.
Add detergent: Use drawer compartments as directed on packaging.
Select program: Turn dial to required cycle.
Adjust settings: Set temperature, spin speed, and options.
Start: Press Start/Pause; door locks automatically.
Pause/Modify: Press Start/Pause to pause; change settings only when paused.
Unload: Wait for door lock light to go off after cycle ends.

WARNING! Do not open door during wash or spin. Wait until drum stops completely.

Special Functions

Delay Timer: Set wash to start later. Child Lock: Prevents accidental changes. Anti-Crease: Reduces wrinkling by tumbling periodically after cycle ends. Extra Rinse: Adds additional rinse for sensitive skin or heavy detergent use.

Care & Cleaning

Unplug before maintenance. Monthly: Clean detergent drawer and rubber door seal. Quarterly: Run 90°C cotton cycle with washing machine cleaner. Biannually: Clean drain pump filter.

CAUTION! Never use abrasive cleaners or solvents on surfaces. Keep filter area clear of debris.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured to ISO 9001 standards. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Disposal: Follow WEEE regulations; do not dispose with household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is properly shut; check power outlet and fuse.
No water intake	Taps off/hoses blocked	Open taps; check hose filters for blockages.
Water doesn't drain	Drain hose blocked/filter full	Clean drain pump filter; check hose for kinks.
Excessive vibration	Transit bolts left in/uneven floor	Remove all transit bolts; re-level machine.
Error code F01-F12	Various faults	Consult manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk