Hotpoint washing machine WMBF 742K UK manual

The Hotpoint WMBF 742K is a freestanding 7kg capacity washing machine with 1400 RPM spin speed, featuring an A+++ energy rating, AquaCare technology for garment care, Anti-Stain programme, Direct Spray for detergent efficiency, and a large LED display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Washing Programmes 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum capacity, LED display and control dial, detergent drawer, water inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	7kg laundry load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
AquaCare Technology	Gentler wash for fabrics
Anti-Stain Programme	Targets specific stains
Direct Spray	Washes detergent directly into drum
LED Display	Shows programme time, settings, and status
Delay Start	Set wash to finish up to 24 hours later
Quick Wash	30-minute programme for lightly soiled items
Child Lock	Prevents accidental changes to settings

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure washers are fitted.
Connect drain hose: Place into standpipe or sink, secure with provided U-bend.
Level the machine: Adjust the feet using a spanner until the machine is stable.
Plug into a grounded 220-240V AC power socket.

WARNING! Do not remove transit bolts before moving into final position. Ensure all connections are secure and there are no leaks.

First-Time Setup

Before first use, run a maintenance wash.

Remove transit bolts: Use spanner to remove bolts at rear, fit covers into holes.
Connect utilities: Follow installation steps for water and power.
Run initial wash: Select the "Drum Clean" or "Cotton 90°C" programme without laundry and with a washing machine cleaner.
Set preferences: Use the control dial and buttons to set language, time, and default options.

CAUTION! Ensure the machine is level to prevent excessive vibration and noise during spin.

Specifications

Model: WMBF 742K UK
Capacity: 7kg
Max Spin Speed: 1400 RPM
Energy Rating: A+++
Water Pressure: 0.5 - 8 bar
Programmes: Cotton, Synthetic, Delicates, Wool, Anti-Stain, Quick Wash, Drum Clean
Dimensions (HxWxD): 85 x 60 x 60 cm (approx)
Power Supply: 220-240V AC, 50Hz
Noise Level: Washing: 53 dB, Spinning: 73 dB

Controls and Settings

Control Panel: Programme dial, Start/Pause button, LED display, option buttons (Delay Start, Extra Rinse, etc.).

Programme Dial: Select from Cotton, Synthetic, Delicates, Wool, Anti-Stain, Quick Wash (30'), Drum Clean. Option Buttons: Delay Start (1-24h), Extra Rinse, Reduced Creases, Child Lock. Display: Shows time remaining, selected options, and error codes.

Settings: Adjust spin speed (via button), temperature (via button). Use Start/Pause to begin or interrupt a cycle.

Connecting Utilities

Water: Cold fill (mandatory), hot fill (optional). Drain: Standpipe, sink, or drain hose kit.

Turn off water supply before connecting hoses.
Connect blue-marked hose to cold tap; red-marked to hot tap if using dual fill.
Ensure drain hose is not kinked and is secured at correct height (60-100 cm from floor).
Plug power cord directly into wall socket; do not use an extension lead.

Tip: Check for leaks at hose connections after first turning on the water.

Using Washing Programmes

Supports various fabrics and soil levels.

Load laundry: Open door, place items loosely in drum. Do not overload.
Add detergent: Pour powder/liquid into correct compartment of drawer (II for main wash, I for pre-wash).
Select programme: Turn dial to desired programme (e.g., Cotton, Synthetic).
Adjust options: Press buttons for extra rinse, reduced spin, etc.
Start: Press Start/Pause. The door locks and cycle begins.
At end: "End" appears on display. Door remains locked for a few minutes. Unplug or turn off water after use.

WARNING! Do not open door during a wash cycle. Wait until "End" is displayed and the door lock symbol disappears.

Special Functions

Delay Start: Set wash to finish later (1-24 hours). Child Lock: Press and hold relevant buttons to lock controls. Anti-Stain: Select programme for specific stains (grass, wine, etc.). Quick Wash: 30-minute cycle for small, lightly soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run "Drum Clean" programme every 40 washes or monthly.

CAUTION! Do not use abrasive cleaners or solvents. Keep the area around the machine dry.

Regulatory Information

Complies with UK and EU safety and EMC directives. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is firmly shut; check plug is switched on; check fuse.
No water entering	Taps/blockage	Ensure water taps are on; check inlet hoses for kinks; clean filter in inlet valve.
Excessive vibration/noise	Transit bolts/level	Ensure transit bolts are removed; re-level the machine on solid floor.
Water not draining	Drain hose/blockage	Check drain hose is not kinked or too low; clean pump filter.
Error code on display	Various faults	Consult manual error code list (e.g., F01, F05). Unplug for 5 minutes, then retry.

Reset: Unplug for 5 minutes, then plug back in.

Service: 03448 113 113; www.hotpoint.co.uk