Hotpoint Washing Machine WMAQF721P Manual

The Hotpoint WMAQF721P is a freestanding washing machine with a 7kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features AquaCare technology for gentle washing, Anti-Stain removal, Direct Spray for even detergent distribution, and a Delay Timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door, water inlet valves, drain pump, and adjustable feet.

FeatureDescription
Capacity7kg load capacity
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (most efficient)
AquaCare TechnologyGentle washing for fabrics
Anti-StainTargeted stain removal programs
Direct SprayEven detergent distribution
Delay TimerUp to 24 hours delay start
Quick Wash30-minute cycle for small loads
Child LockPrevents accidental program changes
Digital DisplayShows time remaining and settings

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
  3. Connect drain hose: Place in standpipe or sink; secure with U-bend.
  4. Level the machine: Adjust feet using spanner; check with spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Check installation: Ensure hoses are secure and machine is level.
  2. Run empty wash: Select Cotton 90°C program without laundry to clean drum.
  3. Set preferences: Use control dial to select language, default temperature, spin speed.
  4. Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Use only HE (High Efficiency) detergent to prevent excess suds.

Specifications

Controls and Settings

Control Panel: Program dial, Start/Pause button, Option buttons (Delay, Extra Rinse, etc.), Digital display.

Program Dial: Select from 15 programs: Cotton (20°C-90°C), Synthetic, Delicates, Wool, Hand Wash, Sportswear, Anti-Stain, Quick Wash, Rinse & Spin, Drain Only.

Options: Delay Timer (1-24h), Extra Rinse, Reduced Creases, Speed Wash. Settings: Default temperature, spin speed, child lock activation. Display: Shows program duration, time remaining, selected options.

Connecting Water & Drain

Water Inlet: Connect to cold water tap (or hot/cold if available). Drain: Hose to standpipe or sink.

  1. Turn off water taps before connecting hoses.
  2. Use supplied hoses; do not reuse old hoses.
  3. Ensure drain hose is not kinked and is at correct height (60-100cm from floor).
  4. Check for leaks after first connection.

Tip: Install drain hose securely to prevent slipping during spin cycle.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
  3. Select program: Turn dial to desired program.
  4. Set options: Press option buttons as needed (e.g., Extra Rinse).
  5. Start: Press Start/Pause; door locks automatically.
  6. Pause/Stop: Press Start/Pause to pause; turn dial to reset to stop.
  7. End of cycle: Signal sounds; door unlocks after short delay.

WARNING! Do not open door during wash; wait for unlock signal. Remove items promptly to prevent creasing.

Special Functions

Delay Timer: Set 1-24 hours delay start. Child Lock: Press and hold Delay + Reduced Creases for 3 seconds to lock/unlock controls. Anti-Stain: Select program for specific stains (wine, grass, mud). Quick Wash: 30-minute cycle for lightly soiled small loads.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and drum.

  1. Clean drawer: Remove and rinse under warm water.
  2. Clean seal: Wipe with damp cloth to remove lint and residue.
  3. Run maintenance cycle: Use Cotton 90°C program without laundry monthly.
  4. Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Keep door slightly open between washes to prevent odors.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug is in; ensure door is properly closed; press Start.
No water intakeTaps/hosesEnsure taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose/pumpCheck drain hose is not kinked; clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; re-level machine on floor.
Error codes on displayVarious faultsConsult manual error code list; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint Washing Machine WMAQF721P Manual © - All Rights Reserved 2025