Hotpoint Washing Machine WMAQF 721 Aquarius Manual

The Hotpoint WMAQF 721 Aquarius is a freestanding washing machine with a 7kg capacity, A+++ energy rating, and 1400 rpm spin speed. It features Aquarius technology for efficient water usage, multiple wash programs, a digital display, delay start, child lock, and rapid wash cycles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and inspect contents. Place on stable, level floor near water and drain points.

1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
3. Connect drain hose: Place in standpipe or sink; ensure no kinks.
4. Level the machine: Adjust feet using wrench; check with spirit level.
5. Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or extreme heat. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial setup cycle.

1. Run empty wash: Select Cotton 90°C program without laundry to clean drum.
2. Set language: Press and hold Start/Pause and Delay buttons to cycle languages.
3. Load detergent: Fill drawer compartments as per detergent instructions.
4. Select program: Turn program dial to desired wash cycle.
5. Start cycle: Press Start/Pause button.

CAUTION! Ensure all packaging is removed and hoses are securely connected before first use.

Specifications

• Model: WMAQF 721 Aquarius
• Capacity: 7kg
• Energy Rating: A+++
• Spin Speed: 1400 rpm
• Water Pressure: 0.5 - 8 bar
• Programs: Cotton, Synthetic, Delicate, Wool, Rapid, Eco, etc.
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Power Supply: 220-240V, 50Hz
• Noise Level: Wash: 56 dB, Spin: 76 dB

Controls and Settings

Control Panel: Program dial, digital display, temperature button, spin speed button, delay start button, start/pause button, option buttons.

Program Dial: Select from Cotton, Synthetic, Delicate, Wool, Rapid 30', Eco 40-60, Hand Wash, Spin, Rinse+Drain.

Temperature: Adjust with button (cold to 90°C). Spin Speed: Adjust with button (0 to 1400 rpm). Delay Start: Set delay up to 24 hours. Options: Extra Rinse, Pre-wash, Easy Iron, Child Lock (press and hold for 3 seconds).

Connecting Water & Drain

Water Inlet: Connect hoses to cold water tap (and hot if machine supports). Drain: Place hose in standpipe (max height 100 cm) or sink.

1. Turn off water supply before connecting hoses.
2. Use only supplied hoses; do not reuse old ones.
3. Ensure drain hose is not submerged to prevent siphoning.
4. Check for leaks after connections.

Tip: Use hose clips for secure connections and avoid sharp bends.

Using Wash Programs

Supports various fabrics and soil levels.

1. Sort laundry: Separate by color, fabric, and soil level.
2. Load drum: Do not overload; leave space for movement.
3. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
4. Select program: Turn dial (e.g., Cotton for cottons, Synthetic for synthetics).
5. Adjust settings: Temperature, spin speed, options as needed.
6. Start: Press Start/Pause; display shows time remaining.
7. Pause/change: Press Start/Pause to pause; turn dial to change program (if allowed).
8. End of cycle: Machine beeps; remove laundry promptly.

WARNING! Do not open door during high-temperature washes; wait for lock light to go off.

Special Functions

Delay Start: Press Delay button to set start time (1-24 hours). Child Lock: Press and hold for 3 seconds to lock controls. Rapid Wash: For lightly soiled loads (30 minutes). Extra Rinse: Adds rinse cycle for sensitive skin. Easy Iron: Reduces wrinkles by lowering spin speed.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

CE compliant; meets EU energy efficiency and safety standards. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 0333 305 3515.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 0333 305 3515; www.hotpoint.co.uk