Hotpoint washing machine WMAQF 621P UK manual

The Hotpoint WMAQF 621P UK is a freestanding washing machine with a 6kg load capacity, 1200 RPM spin speed, and an A+++ energy rating. It features multiple wash programs, a delay timer, child lock, and AquaStop leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector and digital display, detergent dispenser, drum, water inlet hoses, drain hose, and adjustable feet.

Feature	Description
Capacity	6kg laundry load
Spin Speed	Up to 1200 RPM
Energy Rating	A+++ (most efficient)
Programs	15 wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
AquaStop	Leak protection system
Display	Digital display showing time remaining and status
Door	Reversible for left or right opening
Dimensions (HxWxD)	850 x 596 x 545 mm

Installation

Unpack and inspect contents. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn to level machine; use spirit level to check.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and machine inlet.
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power socket.

WARNING! Do not install in areas prone to freezing. Ensure transit bolts are removed before first use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press Power button.
Run empty wash: Select Cotton 90°C program without laundry and start to clean drum.
Set preferences: Use Settings button to adjust buzzer volume, etc.
Load laundry: Do not exceed 6kg; sort by fabric type and colour.
Add detergent: Use dispenser drawer compartments for pre-wash, main wash, and softener.

CAUTION! Ensure all packaging and transit bolts are removed. Check hose connections for leaks.

Specifications

Model: WMAQF 621P UK
Capacity: 6 kg
Spin Speed: 1200 RPM (adjustable)
Energy Class: A+++
Water Consumption: Approx. 45 litres per cycle (Cotton 60°C)
Power Supply: 230-240V ~ 50Hz
Max Power: 2100 W
Programs: 15 including Eco 40-60, Wool, Sport, Anti-Allergy
Noise Level: Wash: 53 dB, Spin: 74 dB
Weight: 67 kg

Controls and Settings

Control Panel: POWER button, Rotary Program Selector, START/PAUSE, Delay Timer, Option buttons (e.g., Extra Rinse, Pre-Wash), Child Lock, Display.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics, Delicates). Display shows duration and options.

Options: Press relevant button to select Extra Rinse, Pre-Wash, Rapid (reduces time), or Silent (reduces noise).

Delay Timer: Press Delay button and use +/- to set start time (up to 24 hours).

Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate.

Settings Menu: Hold Settings button to access buzzer volume, end-of-cycle signal, etc.

Connecting Water & Drain

Water Inlet: Connect blue-cold hose to cold tap (recommended). If connecting hot, use red-hot hose. Drain: Ensure hose is not kinked and placed securely.

Turn off water tap before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Secure drain hose to standpipe or sink with hook provided.
After connection, turn on tap and check for leaks.

Tip: For permanent drain, secure hose to waste pipe using a U-bend.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load sorted laundry, close firmly.
Add detergent: Pull dispenser drawer, add powder/liquid to correct compartments.
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
Set options: Press Extra Rinse for sensitive skin, Rapid for lightly soiled loads.
Start: Press START/PAUSE. Display shows time remaining.
Pause/change: Press START/PAUSE to pause; turn knob to change program (if allowed).
End of cycle: Buzzer sounds; remove laundry promptly to avoid creasing.

WARNING! Do not open door during high-temperature washes; wait for lock light to go off.

Special Functions

Delay Start: Set to start wash at convenient time. Child Lock: Prevents program changes during cycle. AquaStop: Automatically shuts off water if leak detected (check hose regularly).

Care & Cleaning

Regular maintenance ensures performance and longevity.

Clean detergent drawer: Pull out, rinse under tap, dry and reinsert.
Clean drum: Run empty Cotton 90°C cycle monthly with washing machine cleaner.
Clean filter: Locate at front bottom; place towel, open cap, drain water, remove debris.
Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use steam cleaners.

Regulatory Information

Complies with UK safety and EMC regulations. CE marked. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door shut firmly; check plug socket is on; press Power button.
No water entering	Taps/water pressure	Check taps are on; ensure inlet hoses not kinked; clean filter in hose.
Machine vibrating/noisy	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine; redistribute load.
Water not draining	Drain hose/filter	Check drain hose is not kinked or too high; clean pump filter.
Error codes on display (e.g., F01, F05)	Various faults	Consult error code list in manual; try reset by unplugging for 2 minutes.
Detergent not dispensing	Drawer blocked	Clean detergent drawer compartments; use correct detergent type.

Reset: Unplug for 2 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk