Hotpoint Washing Machine WMAOD 844P UK Manual

The Hotpoint WMAOD 844P is a freestanding 8kg capacity washing machine with an A+++ energy rating, featuring a 1400 RPM spin speed, multiple wash programs including a 15-minute quick wash, anti-allergy cycle, and direct spray technology for efficient cleaning. It includes delay start, child lock, and imbalance detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 8kg drum, LED display, program selector dial, detergent dispenser, filter access, adjustable feet, water inlet hoses, drain hose.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Connect water supply: Attach inlet hoses to cold water tap (and hot if using dual supply). Ensure washers are fitted.
2. Connect drain hose: Place into standpipe, sink, or drain as per instructions (max height 100cm).
3. Adjust feet: Use a spanner to level the machine; check with spirit level.
4. Plug into a grounded 220-240V, 50Hz AC power outlet.

WARNING! Do not install in areas prone to freezing or extreme heat. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Power on machine: Press the power button.
2. Run a cleaning cycle: Select the "Drum Clean" program (if available) or a 90°C cotton cycle without laundry.
3. Set preferences: Use the control dial and buttons to set desired options like spin speed and temperature.
4. Load detergent: Add detergent to the appropriate dispenser drawer compartment.

CAUTION! Ensure all packaging and transit bolts are removed. Check for water leaks after first connection.

Specifications

• Model: WMAOD 844P UK
• Capacity: 8 kg
• Energy Class: A+++
• Annual Energy Consumption: 150 kWh
• Water Consumption: 9,000 litres per year (approx.)
• Spin Speed: 1400 RPM (adjustable)
• Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash (15 min), Anti-Allergy, Drum Clean
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Power Supply: 220-240V, 50Hz, 10A
• Weight: 68 kg

Controls and Settings

Control Panel: Power button, Program selector dial, Start/Pause button, Option buttons (Spin Speed, Temperature, Delay Start), LED display.

Program Dial: Select from Cotton, Eco Cotton, Synthetics, Delicates, Wool, Quick Wash, Anti-Allergy, Rinse & Spin, Drain.

Options: Adjust spin speed (from No Spin to 1400 RPM), temperature (Cold to 90°C), and delay start (1-24 hours). Press and hold Start/Pause for 3 seconds to activate/deactivate Child Lock. Display shows time remaining, cycle stage, and error codes.

Connecting Water & Drain

Water Inlet: Cold fill only (or hot/cold if model supports). Drain: Hose can be placed in standpipe, sink, or drain hole.

1. Ensure water taps are off before connecting hoses.
2. Connect hoses to machine and tap, hand-tighten plus a quarter turn with pliers.
3. Position drain hose correctly; do not submerge in water to avoid siphoning.
4. After connections, turn on taps and check for leaks.

Tip: Use the U-bend piece provided for standpipe installation to secure the hose.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Open door, load items loosely without overloading (max 8kg).
2. Add detergent: Pull out dispenser drawer, add powder/liquid to correct compartment (main wash, pre-wash, softener).
3. Select program: Turn dial to desired program (e.g., Cotton for everyday items).
4. Adjust options: Press Temperature or Spin Speed buttons to modify as needed.
5. Start: Press Start/Pause. The door locks and cycle begins. Display shows time remaining.
6. At end: "End" appears. Door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open door during cycle; wait for door lock symbol to disappear. Check pockets for objects.

Special Features

Delay Start: Set timer (1-24h) to finish wash at desired time. Child Lock: Locks controls during operation (press and hold Start/Pause). Anti-Allergy: Heats water to remove allergens. Quick Wash: 15-minute cycle for small, lightly soiled loads. Imbalance Detection: Automatically redistributes load and reduces spin speed if unbalanced.

Care & Cleaning

Regular maintenance ensures performance and longevity.

1. Clean detergent drawer: Pull out, rinse under warm water, dry, and reinsert.
2. Clean door seal: Wipe rubber gasket with damp cloth to remove lint and residue.
3. Clean filter: Turn off and unplug machine. Open filter cover at bottom front, place towel, unscrew filter slowly to drain residual water, clean under running water, reinsert, and close cover.
4. Run Drum Clean cycle monthly: Use a washing machine cleaner or hot cycle without laundry.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

Complies with UK and EU safety and energy efficiency standards. CE marked. Manufactured for the UK market (220-240V, 50Hz). Disposal: At end of life, dispose of according to local WEEE regulations. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. For persistent issues, call support.

Service: 03448 113 113; www.hotpoint.co.uk