Hotpoint Washing Machine WMAL 621 Manual

The Hotpoint WMAL 621 is a freestanding washing machine with a 6kg capacity, featuring multiple wash programs, energy efficiency class A, spin speed up to 1200 rpm, delay timer, child lock, and easy-to-use electronic controls. Designed for standard household use, it operates on 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent drawer, drum, door with safety lock, water inlet valves, drain pump, adjustable feet.

Feature	Description
Capacity	6kg (dry laundry weight)
Spin Speed	Up to 1200 rpm (adjustable)
Energy Class	A (energy efficient)
Programs	Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Automatic safety lock during operation
Display	LED with time remaining and cycle indicators
Water Inlet	Hot & cold water connections
Dimensions (HxWxD)	85 x 60 x 54 cm

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (blue for cold, red for hot).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Level the machine: Adjust front feet until machine is stable and does not rock.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Ensure machine is installed correctly and plugged in.
Open detergent drawer, add 1/2 cup of bleach (no laundry), close drawer.
Select "Cotton" program at 90°C.
Press Start/Pause to begin cycle; let it complete.
After cycle, machine is ready for normal use.

CAUTION! Never use the machine without removing transit bolts—this can cause serious damage.

Specifications

Model: Hotpoint WMAL 621
Capacity: 6 kg
Spin Speed: 1200 rpm (variable)
Energy Rating: A
Water Pressure: 0.5 - 8 bar
Power Supply: 220-240V, 50Hz
Programs: 12 programs including Eco, Quick, Delicate
Noise Level: Wash: 59 dB, Spin: 77 dB
Dimensions: 85 cm H x 60 cm W x 54 cm D
Weight: 65 kg

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Delay Timer button, Option buttons (Extra Rinse, Pre-wash, etc.), Child Lock button.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, Wool, Quick 30', etc.).

Options: Extra Rinse (adds rinse cycle), Pre-wash (for heavily soiled items), Reduced Creases (slower final spin). Delay Timer: Press to set start delay (1-24 hours). Child Lock: Press and hold for 3 seconds to activate/deactivate. Display: Shows time remaining, cycle stage, and selected options.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (use supplied washers). Drain: Secure hose to standpipe or sink.

Turn off water taps before connecting hoses.
Connect blue hose to cold tap, red to hot (if available).
Ensure drain hose is not kinked and is secured.
Check for leaks by turning on taps briefly before first wash.

Tip: Use hose clips to secure connections and prevent slipping.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Pour into main wash compartment (II) of drawer.
Select program: Turn knob (e.g., Cotton for normal loads).
Set options: Press Extra Rinse, Pre-wash, etc. as needed.
Set delay (optional): Press Delay Timer to postpone start.
Start: Press Start/Pause; door locks automatically.
After cycle: Door unlocks; remove laundry promptly.

WARNING! Do not open door during wash/spin; wait for unlock signal. Do not wash waterproof items.

Special Features

Delay Timer: Postpone start up to 24 hours. Child Lock: Locks controls to prevent changes. Reduced Creases: Slower final spin to minimize wrinkles. Quick 30': Fast wash for lightly soiled loads. Eco Program: Saves energy and water for normally soiled cotton.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent drawer: Pull out, rinse under tap monthly.
Clean door seal: Wipe rubber gasket to remove lint/debris.
Run maintenance wash: Monthly, use hot cotton program without laundry.
Clean filter: Turn off machine, open filter cover at front, drain water, remove and clean filter.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

Complies with EU directives for safety (EN 60335), EMC (EN 55014), and energy labeling (EU 2019/2014). Manufactured under ISO 9001 quality standards. Copyright © Hotpoint. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 344 822 4224.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock/door	Check plug; ensure door closed properly; deactivate child lock.
No water intake	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose for kinks/blockages; clean pump filter.
Excessive vibration/noise	Transit bolts/leveling/load	Ensure transit bolts removed; re-level machine; redistribute laundry.
Error codes on display	Various faults	Refer to error code list in manual; reset by unplugging for 1 minute.

Reset: Unplug for 5 minutes, then restart.

Service: +44 (0) 344 822 4224; www.hotpoint.eu