Hotpoint Washing Machine WMA33 Aquarius Manual

The Hotpoint WMA33 Aquarius is a freestanding washing machine with a 6kg capacity, 1200 rpm spin speed, A+++ energy rating, and multiple wash programs. It features Aquarius technology for efficient water usage, delay start, child lock, quick wash cycles, and electronic controls. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, filter, water inlet hoses, drain hose, adjustable feet.

FeatureDescription
Capacity6kg load capacity
Spin Speed1200 rpm maximum
Energy RatingA+++ (most efficient)
Aquarius TechnologyOptimizes water usage for efficiency
Programs14 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay StartUp to 24 hours delay timer
Child LockPrevents accidental program changes
DisplayLED digital display with time remaining
DoorReversible for left/right opening
Dimensions85cm H x 60cm W x 54cm D

Installation

Unpack and remove transit bolts. Place on level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level.
  3. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if available (red marker).
  4. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial empty wash.

  1. Check connections: Ensure hoses are tight and no leaks.
  2. Add detergent: Pour into compartment II (main wash) of dispenser.
  3. Select program: Choose Cotton 90°C without laundry.
  4. Start: Press Start/Pause to begin; let complete full cycle.
  5. Set preferences: Adjust spin speed, temperature, delay start as needed.

CAUTION! First wash may contain residual water; this is normal.

Specifications

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Option buttons (Delay, Spin Speed, Temperature), Display.

Programs: Cotton (20°C-90°C), Synthetics (30°C-60°C), Delicates (30°C), Wool, Quick Wash (30°C, 30 min), Eco 40-60, Rinse & Spin, Drain.

Options: Delay Start (1-24 hrs), Spin Speed (400-1200 rpm, Rinse Hold, No Spin), Temperature (Cold, 20°C-90°C). Display: Shows time remaining, cycle stage, options selected. Child Lock: Press and hold Delay + Spin Speed for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Hose to standpipe (max height 100cm) or sink.

  1. Turn off taps before connecting hoses.
  2. Use only supplied hoses; replace if damaged.
  3. Ensure drain hose is not kinked and secured.
  4. Check for leaks after first connection.

Tip: Use drain hose extension if needed; do not exceed maximum length.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Sort laundry: By color, fabric type, and soil level.
  2. Load: Open door, place items loosely in drum; do not overload.
  3. Add detergent: Use compartment I (pre-wash) if needed, II (main wash), III (fabric softener).
  4. Select program: Turn knob to desired program (e.g., Cotton for towels).
  5. Adjust options: Set temperature, spin speed, delay if required.
  6. Start: Press Start/Pause; display shows time remaining.
  7. Pause/change: Press Start/Pause to pause; turn knob to change program (may reset).
  8. End: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not open door during high temperature wash; wait until lock light goes off.

Special Features

Aquarius Technology: Reduces water usage while maintaining wash performance. Delay Start: Set to start later (e.g., at night). Child Lock: Locks controls to prevent tampering. Quick Wash: 30-minute cycle for lightly soiled items. Rinse Hold: Holds water after final rinse for easy hand washing addition.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, door seal, and filter.

  1. Dispenser: Remove tray, rinse under warm water.
  2. Door seal: Wipe with damp cloth to remove lint and residue.
  3. Filter: Turn off machine, open filter cover at front bottom, place towel, unscrew filter, clean under running water.
  4. Drum: Run empty hot wash (90°C) with detergent monthly to remove buildup.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Energy label according to EU regulation 2019/2014.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug is in; ensure door is closed properly; press Start/Pause.
No water enteringTaps/hoses/filterEnsure taps are on; check hoses for kinks; clean inlet filter.
Water not drainingDrain hose/filterCheck hose for kinks; clean pump filter; ensure standpipe not blocked.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet to level; redistribute load.
Error codes (e.g., F01)Various faultsConsult manual; common: F01 = water inlet fault; check taps/hoses.
Leaking waterHoses/sealTighten hose connections; check door seal for debris; replace if damaged.

Reset: Unplug for 5 minutes, then restart. For persistent errors, call service.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint Washing Machine WMA33 Aquarius Manual © - All Rights Reserved 2025