Hotpoint washing machine WMA31 Aquarius manual

The Hotpoint WMA31 Aquarius is a freestanding washing machine with a 6kg capacity, featuring Aquarius technology for efficient cleaning, multiple wash programs, energy efficiency rating, spin speed options, delay start, child lock, and various safety features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with program selector, detergent dispenser, door lock, drain pump filter, adjustable feet, water inlet valves.

Feature	Description
Capacity	6kg load capacity
Aquarius Technology	Efficient water and energy use
Spin Speed	Up to 1400 rpm
Programs	Multiple wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours delay timer
Child Lock	Prevents accidental program changes
Energy Rating	A+++ energy efficiency
Door Lock	Safety lock during operation
Detergent Dispenser	Compartments for pre-wash, main wash, fabric softener
Display	LED indicators for program progress

Installation

Unpack and inspect contents. Place on level floor.

Remove transit bolts: Use spanner to remove all transit bolts from rear.
Adjust feet: Level machine using adjustable feet; ensure it's stable.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place drain hose into standpipe or sink.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure.

First-Time Setup

Before first use, run a maintenance wash.

Remove packaging: Ensure all internal packaging is removed.
Check transit bolts: Verify all transit bolts are removed.
Run empty wash: Select Cotton program at 90°C without laundry.
Set water hardness: Adjust in settings if required.
Load detergent: Use recommended amount for first wash.

CAUTION! Ensure machine is level to prevent vibration during spin cycle.

Specifications

Model: WMA31 Aquarius
Capacity: 6kg
Energy Rating: A+++
Spin Speed: 1400 rpm
Programs: Cotton, Synthetics, Delicates, Quick Wash, Wool, Silk, Sportswear
Water Pressure: 0.5 - 10 bar
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220-240V, 50Hz
Noise Level: 59 dB (washing), 75 dB (spinning)

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Delay Start button, Option buttons.

Program Selection: Turn knob to select desired program. LED indicators show selected options.

Options: Extra Rinse, Pre-wash, Reduced Creasing, Speed Wash. Settings: Temperature selection (cold to 90°C), Spin speed selection (0-1400 rpm), Delay Start (1-24 hours). Child Lock: Press and hold Start/Pause for 3 seconds to activate/deactivate.

Connecting Water Supply

Cold water connection standard; hot water optional.

Turn off water supply before connecting hoses.
Connect inlet hoses to corresponding valves (blue for cold, red for hot).
Ensure hose filters are clean and connections are tight.
Check for leaks after turning water supply back on.

Tip: Use only provided hoses; do not reuse old hoses.

Using Wash Programs

Select appropriate program for fabric type.

Sort laundry: Separate by color and fabric type.
Load machine: Do not exceed 6kg maximum.
Add detergent: Use dispenser compartments as indicated.
Select program: Turn knob to desired program.
Set options: Adjust temperature, spin speed if needed.
Start: Press Start/Pause button.
Delay Start: Press Delay button to set start time.
End of cycle: Machine beeps; remove laundry promptly.

WARNING! Do not open door during wash cycle; wait for door lock to release.

Safety Features

Child Lock: Prevents program changes during operation. Door Lock: Automatic lock during wash cycle. Overflow Protection: Automatically stops water intake if detected. Unbalanced Load Detection: Adjusts spin or stops if load is uneven.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean detergent dispenser: Remove monthly and wash under running water.
Clean door seal: Wipe rubber seal to remove lint and residue.
Clean drain pump filter: Access front panel; remove debris monthly.
Run maintenance wash: Monthly empty wash at 90°C.

CAUTION! Unplug machine before cleaning any components.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation. For support, visit www.hotpoint.co.uk or contact 03448 113 113. Copyright © Hotpoint. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Ensure door is properly closed; check power supply.
No water intake	Water supply/taps	Check water taps are on; ensure hoses not kinked.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Water not draining	Drain hose/filter	Check drain hose is not blocked; clean pump filter.
Error codes displayed	Various faults	Refer to error code chart in manual; reset machine.

Reset: Unplug for 1 minute to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk