Hotpoint Washing Machine WDXD 8640P UK Manual

The Hotpoint WDXD 8640P is a freestanding 8kg washing machine with 1400 RPM spin speed, featuring AquaCare technology for reduced creasing, Anti-Stain Plus for tough stains, Direct Spray for efficient rinsing, and a range of programmes for different fabrics. It includes a digital display, delay start, and energy efficiency class A. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 8kg drum capacity, Digital display, Programme selector knob, Start/Pause button, Delay start, Anti-Stain Plus, AquaCare, Direct Spray, Child lock.

Installation

Unpack and inspect contents. Place on level floor.

1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hose to cold water tap (3/4” thread).
3. Connect drain hose: Place in standpipe or sink; ensure no kinks.
4. Level the machine: Adjust feet using spanner; check with spirit level.
5. Plug into 220-240V AC power socket.

WARNING! Do not install in areas prone to freezing. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in and power on machine; run initial empty wash.

1. Remove packaging: Check drum for transit materials.
2. Run cleaning cycle: Select “Drum Clean” programme with detergent.
3. Set clock: Press and hold “Delay” button to set current time.
4. Load laundry: Do not exceed 8kg; distribute evenly.
5. Select programme: Turn knob to desired setting.
6. Add detergent: Use drawer compartments as marked.
7. Start: Press Start/Pause button.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

• Model: WDXD 8640P UK
• Capacity: 8kg
• Spin Speed: 1400 RPM
• Programmes: Cotton, Synthetics, Delicates, Wool, Quick Wash, Drum Clean, etc.
• Dimensions (HxWxD): 85cm x 60cm x 60cm
• Power Supply: 220-240V AC, 50Hz
• Water Pressure: 0.5 - 8 bar
• Energy Rating: A
• Noise Level: 74 dB (washing), 79 dB (spinning)

Controls and Settings

Access controls via front panel. Programme Knob: Select wash programmes. Display: Shows time, options, status. Buttons: Start/Pause, Delay, Extra Rinse, Anti-Stain, Child Lock.

Programmes: Cotton (40°C-90°C), Synthetics (40°C-60°C), Delicates (30°C), Wool (hand wash cycle), Quick Wash (30 min), Drum Clean (90°C). Options: Delay start (1-24h), Extra Rinse, Anti-Stain Plus, Reduced Crease (AquaCare). Settings: Child lock (hold Delay + Start for 3 sec), temperature selection, spin speed adjustment.

Connecting Water & Drain

Water Inlet: Cold fill only. Drain: Hose to standpipe or sink.

1. Turn off water tap before connecting hose.
2. Attach inlet hose to machine and tap; hand-tighten.
3. Place drain hose in standpipe (max height 100cm) or over sink edge.
4. Secure hose to prevent slipping.

Tip: Use hose clips provided. Ensure no kinks in hoses.

Using Programmes

Supports various fabrics and soil levels.

1. Load laundry: Do not overload; close door securely.
2. Add detergent: Pour into main wash compartment (II).
3. Select programme: Turn knob (e.g., Cotton for towels).
4. Set options: Press Extra Rinse, Anti-Stain, etc. as needed.
5. Set delay: Press Delay button to set finish time.
6. Start: Press Start/Pause; display shows time remaining.
7. Pause/change: Press Start/Pause to stop; wait 2 min to open door.
8. End of cycle: Machine beeps; remove laundry promptly.

WARNING! Do not open door during spin cycle. Unbalance may cause machine to stop.

Care & Maintenance

Clean regularly to ensure performance.

1. Detergent drawer: Remove and rinse monthly.
2. Door seal: Wipe clean; check for objects.
3. Drum: Run “Drum Clean” monthly with cleaner.
4. Filter: Access front panel; clean every 3 months.
5. Exterior: Wipe with damp cloth; unplug first.

CAUTION! Do not use abrasive cleaners. Unplug before maintenance.

Safety Features

Child Lock: Disables controls. Door Lock: Prevents opening during wash. Overflow protection: Auto shut-off. Unbalance detection: Adjusts spin or stops.

Regulatory Information

Complies with UK/EU safety standards. CE marked. Waste Electrical regulations apply; dispose of properly. Copyright © Hotpoint. For support, visit www.hotpoint.co.uk or contact 03448 247 365.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 03448 247 365; www.hotpoint.co.uk