Hotpoint washing machine WDUD 9640P manual

The Hotpoint WDUD 9640P is a freestanding 9kg capacity washing machine with a 1400 rpm spin speed, featuring A+++ energy rating, multiple wash programs, delay timer, child lock, and anti-crease function. It includes Hotpoint's AquaStop leak protection and Direct Spray technology for efficient washing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector, LED display, detergent dispenser, drum, filter, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 rpm
Energy Rating	A+++ (most efficient)
AquaStop	Leak protection system
Direct Spray	Pre-wash spray technology
Programs	15 programs including Cotton, Synthetic, Delicate, Quick Wash
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles at end of cycle
Display	LED with time remaining and cycle indicators

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet; use spirit level to ensure stability.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Check installation: Ensure hoses are secure and machine is level.
Run empty wash: Select Cotton 90°C program without laundry to clean drum.
Set preferences: Use OPTIONS button to adjust default settings if needed.
Load detergent: Fill compartments as per detergent instructions.

CAUTION! Use only HE (High Efficiency) detergent to prevent excess suds.

Specifications

Model: WDUD 9640P
Capacity: 9 kg
Spin Speed: 1400 rpm
Energy Class: A+++
Water Consumption: Approx. 52 litres per cycle (Cotton 60°C)
Noise Level: Washing: 53 dB; Spinning: 75 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage: 220-240V, 50Hz
Programs: 15 including Eco 40-60, Sport, Wool, Hand Wash
Special Features: Delay Start, Extra Rinse, Speed Wash

Controls and Settings

Control Panel: Rotary selector, START/PAUSE, OPTIONS, Delay Timer, Child Lock buttons.

Rotary Selector: Turn to choose program (Cotton, Synthetic, Delicate, etc.). LED Display: Shows time remaining, cycle stage, and options.

Options: Temperature selection (cold to 90°C), spin speed (0 to 1400 rpm), Extra Rinse, Pre-wash, Speed Wash. Delay Timer: Press DELAY to set start time (1-24 hrs). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if used). Drain: Place hose securely.

Ensure taps are off before connecting hoses.
Use only provided hoses; do not overtighten.
Drain hose must not be kinked or submerged.
Check for leaks after first connection.

Tip: Install AquaStop device if included for added leak protection.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 9 kg; distribute evenly.
Add detergent: Use dispenser compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn rotary knob (e.g., Cotton for linens).
Adjust options: Set temperature, spin speed, Extra Rinse if needed.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to stop; wait 2 minutes to open door.
End of cycle: Signal sounds; remove laundry promptly to avoid creasing.

WARNING! Do not wash waterproof items (e.g., raincoats) to prevent imbalance.

Special Functions

Delay Timer: Delays start up to 24 hours. Child Lock: Locks controls during wash. Anti-Crease: Drum rotates periodically after cycle to reduce wrinkles. Extra Rinse: Adds rinse cycle for sensitive skin. Speed Wash: Reduces time for lightly soiled loads.

Care & Cleaning

Monthly maintenance: Clean detergent dispenser, drum, and filter.

Dispenser: Remove and rinse under water.
Drum: Run hot wash (90°C) without laundry.
Filter: Turn off machine; open filter cover at front; place towel; unscrew filter; clean.
Door seal: Wipe with damp cloth to remove residue.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives. Manufacturer: Hotpoint, a Haier company. For EU product registration, visit www.hotpoint.eu/register. Waste disposal: Dispose of packaging and old appliance per local regulations. For support, visit www.hotpointservice.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses	Ensure taps on; check hoses for kinks; clean inlet filter.
Excessive vibration/noise	Transit bolts/load	Verify transit bolts removed; redistribute laundry; level feet.
Water not draining	Drain hose/filter	Check hose for kinks; clean pump filter.
Error codes (e.g., F01)	Fault	Consult manual error list; unplug for 5 minutes; retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpointservice.co.uk