Hotpoint Washing Machine WDD 750P UK Manual

The Hotpoint WDD 750P is a freestanding 7kg capacity washing machine with an A+++ energy rating, featuring 16 wash programs, a 1400 RPM spin speed, AquaCare™ technology for reduced fabric wear, Anti-Stain system for tough stains, Direct Spray for even detergent distribution, and a Delay Timer up to 24 hours. It includes safety features like child lock, automatic imbalance detection, and leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary dial and digital display, detergent drawer, door with safety lock, water inlet hoses, drain hose, adjustable feet, and filter access.

FeatureDescription
Capacity7kg (dry laundry weight)
Energy RatingA+++ (most efficient)
Spin SpeedUp to 1400 RPM
Wash Programs16 programs including Cotton, Synthetics, Delicates, Quick Wash, Anti-Stain
AquaCare™ TechnologyGentler wash action to reduce wear on fabrics
Anti-Stain SystemPre-treatment for tough stains like wine, grass, grease
Direct SpraySprays detergent directly onto laundry for even distribution
Delay TimerDelay start up to 24 hours
Child LockLocks control panel during operation
Imbalance DetectionAutomatically redistributes load for smooth spin

Installation

Unpack and inspect contents. Place on a solid, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn clockwise to raise, anti-clockwise to lower; ensure machine is level.
  3. Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if applicable (red marker).
  4. Connect drain hose: Place into standpipe, sink, or drain as per instructions.
  5. Plug into a grounded 230V, 50Hz AC power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Plug in and power on the machine; run an initial maintenance wash.

  1. Set language: Press and hold START/PAUSE for 3 seconds to cycle through display languages.
  2. Run first wash: Select the "Cotton 90°" program without laundry and a small amount of detergent to clean the drum.
  3. Adjust settings: Use the CONTROL KNOB to select programs and OPTIONS buttons for extra functions.
  4. Test child lock: Press and hold DELAY START and OPTION 3 simultaneously for 3 seconds to activate/deactivate.

CAUTION! Ensure all packaging and transit bolts are removed. Check for water leaks after first connection.

Specifications

Controls and Settings

Control Panel: Rotary PROGRAM SELECTOR knob, digital DISPLAY, START/PAUSE button, OPTION buttons (e.g., Extra Rinse, Pre-Wash, Speed Wash), DELAY START button, and CHILD LOCK indicator.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics, Delicates). Display shows duration, temperature, and spin speed.

Options: Press to add functions (e.g., Extra Rinse reduces detergent residue, Pre-Wash for heavily soiled items).

Delay Start: Press to set start delay (1-24 hours); display shows countdown.

Temperature/Spin Adjustment: Press TEMP or SPIN buttons (if available) to modify default settings.

Connecting Utilities

Water Inlet: Connect hoses to taps (cold mandatory, hot optional). Drain: Secure hose to standpipe (max height 100cm). Power: Use dedicated socket.

  1. Ensure water taps are off before connecting hoses.
  2. Use only supplied hoses; do not overtighten.
  3. Ensure drain hose is not kinked and is securely placed.
  4. Plug directly into wall socket; avoid extension cords.

Tip: Check inlet hose filters periodically for debris and clean if necessary.

Using Wash Programs

Select from 16 programs for different fabric types and soil levels.

  1. Load laundry: Open door, load items loosely without overloading (max 7kg).
  2. Add detergent: Pour into main wash compartment (II) of drawer. Use pre-wash compartment (I) if selected.
  3. Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
  4. Adjust options: Press OPTIONS as needed (e.g., Extra Rinse for sensitive skin).
  5. Start: Press START/PAUSE. Display shows remaining time.
  6. Pause/Modify: Press START/PAUSE to pause; you can add/remove items within a short time.
  7. End of cycle: Machine beeps; turn off water tap; remove laundry promptly.

WARNING! Do not overload the drum. Close detergent drawer properly to prevent leaks.

Special Features

AquaCare™: Uses a gentler wash motion. Anti-Stain: Select program for specific stains. Direct Spray: Ensures detergent reaches all laundry. Imbalance Control: Auto-redistributes load. Child Lock: Locks controls during cycle (activate via button combination).

Care & Cleaning

Unplug before maintenance. Clean door seal and glass monthly with damp cloth. Clean detergent drawer regularly; remove and rinse under tap. Run "Drum Clean" program monthly (without laundry) or use 90° cotton program with washing machine cleaner. Check and clean pump filter every 3 months.

CAUTION! Do not use abrasive cleaners or solvents. Ensure filter is securely re-fitted after cleaning.

Regulatory Information

Complies with UK Electrical Equipment (Safety) Regulations 2016 and EC Directives. CE marked. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle at designated facility. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerEnsure door is firmly shut; check power socket is on; press START/PAUSE.
No water intakeTaps off/hose kinkedOpen water taps; check hoses for kinks; clean inlet filters.
Machine vibrates excessivelyTransit bolts/levelingEnsure transit bolts removed; adjust feet to level machine; redistribute load.
Water not drainingDrain hose blockedCheck drain hose for blockages/kinks; clean pump filter.
Error code on display (e.g., F01)Various faultsConsult manual error code list; unplug for 5 minutes, then retry; call support if persistent.
Detergent drawer leakingDrawer not inserted properlyRemove drawer, clean, and reinsert firmly; ensure no detergent residue blocking.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 03448 113 113; www.hotpoint.co.uk

Hotpoint Washing Machine WDD 750P UK Manual © - All Rights Reserved 2025