Hotpoint washing machine VLSR1090GWW manual

The Hotpoint VLSR1090GWW is a 10kg capacity top-loading washing machine with 15 wash programs, variable spin speeds up to 1200 RPM, energy-efficient inverter motor, delay start timer, child lock, automatic load sensing, and stainless steel drum. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, stainless steel drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	10kg maximum load capacity
Wash Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Spin Speed	Variable up to 1200 RPM
Motor	Energy-efficient inverter motor
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Load Sensing	Automatically detects load size
Water Protection	Anti-flood system
Display	Digital LED with time remaining
Drum Clean	Special program for drum maintenance

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Use wrench to remove 4 bolts at rear of machine.
Adjust feet: Turn leveling feet to ensure machine is stable and level.
Connect water supply: Attach inlet hoses to hot and cold water taps (if applicable).
Connect drain hose: Place hose in standpipe or sink, secure with provided hook.
Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an empty wash cycle to clean the drum.

Power on machine: Press POWER button on control panel.
Select Drum Clean program: Turn program selector to special maintenance cycle.
Add detergent: Place washing machine cleaner or 100ml of bleach in detergent compartment.
Start cycle: Press START/PAUSE button to begin cleaning cycle.
Set preferences: Use OPTIONS button to select spin speed, temperature, and additional functions.

CAUTION! Ensure all packaging materials and transit bolts are removed before first use.

Specifications

Model: VLSR1090GWW
Capacity: 10kg (22 lbs)
Dimensions: 60cm W × 85cm H × 60cm D
Voltage: 120V AC, 60Hz
Power Consumption: 2100W maximum
Water Pressure: 0.5-8 bar (7-116 psi)
Spin Speed: 400-1200 RPM variable
Programs: 15 wash programs
Noise Level: 58 dB(A) washing, 72 dB(A) spinning
Weight: 68kg (150 lbs)

Controls and Settings

Control Panel: POWER button, program selector dial, digital display, START/PAUSE, OPTIONS, DELAY START, CHILD LOCK.

Program Selection: Turn dial to select: COTTON, SYNTHETICS, DELICATES, WOOL, QUICK WASH (30 min), SPORTS, BED LINEN, JEANS, ANTI-ALLERGY, RINSE+SPIN, DRAIN, DRUM CLEAN.

Options: Temperature selection (cold to 90°C), spin speed (0-1200 RPM), extra rinse, pre-wash, intensive wash. Delay Start: Set timer up to 24 hours. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water Supply

Hot and cold water inlet connections (red and blue hoses).

Turn off water taps before connecting hoses.
Connect blue hose to cold water tap, red hose to hot water tap (if available).
Hand-tighten connections; do not overtighten.
Open water taps fully and check for leaks.
For cold-only connection: Use both hoses on cold tap with Y-connector (if provided).

Tip: Use only provided hoses; replace every 5 years to prevent leaks.

Using Wash Programs

Follow fabric care labels for best results.

Sort laundry: Separate by color, fabric type, and soil level.
Load machine: Do not exceed 10kg maximum capacity.
Add detergent: Use compartment I for pre-wash, II for main wash, * for fabric softener.
Select program: Turn dial to appropriate setting.
Set options: Adjust temperature, spin speed, and additional functions.
Start cycle: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to pause; turn dial to change program (if not locked).
End of cycle: Machine beeps; remove laundry promptly to prevent wrinkles.

WARNING! Do not wash waterproof items or items with flammable substances. Balance load to prevent vibration.

Maintenance Features

Drum Clean program: Run monthly with empty drum and cleaner. Child Lock: Prevents accidental program changes. Automatic imbalance detection: Reduces spin speed if load is unbalanced. Filter cleaning: Access drain filter at front bottom right.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly by removing and rinsing under water. Clean drain filter every 3 months. Leave door slightly open after use to prevent odors.

CAUTION! Do not use abrasive cleaners or solvents. Never hose down the machine.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. Energy Star certified. Manufactured to ISO 9001 standards. Copyright © Hotpoint. For support, visit www.hotpoint.com or contact 1-800-374-4432. Model VLSR1090GWW serial number located on rear panel.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock	Check power cord; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Ensure water taps are open; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check drain hose for blockages; clean drain filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust leveling feet; balance load.
Error codes on display	Various faults	Consult manual error code list; unplug for 5 minutes then retry.
Door won't open	Water temperature/safety	Wait for door lock to release; ensure cycle is complete/paused.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-374-4432; www.hotpoint.com