Hotpoint Washing Machine VBXR1090BWW Manual

The Hotpoint VBXR1090BWW is a 10kg capacity top-loading washing machine with 12 wash programs, including Cotton, Synthetic, Delicates, Quick Wash, and Heavy Duty cycles. It features a 1400 RPM spin speed, delay start timer up to 24 hours, child lock, automatic load sensing, and energy efficiency class A. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	10 kg maximum load
Spin Speed	Up to 1400 RPM
Wash Programs	12 programs including Cotton, Synthetic, Delicates
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Load Sensing	Automatically adjusts water and energy usage
Energy Class	A rating for efficiency
Display	Digital time and cycle indicators
Quick Wash	30-minute cycle for lightly soiled items
Rinse Hold	Option to pause before final spin

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot and cold taps (if applicable); ensure washers are fitted.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using spanner; use spirit level to check.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on machine; follow initial setup steps.

Run a maintenance wash: Select Cotton program at 90°C without laundry to clean drum.
Set language: If available, select ENGLISH (default).
Test functions: Run a short cycle to ensure proper operation.
Familiarize with controls: Review program selector and options.

CAUTION! Ensure machine is level to prevent vibration and noise during spin.

Specifications

Model: VBXR1090BWW
Capacity: 10 kg
Spin Speed: 1400 RPM
Programs: 12 (Cotton, Synthetic, Delicates, Quick Wash, Heavy Duty, Wool, Silk, Sportswear, Bedding, Rinse+Spin, Drain, Maintenance)
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.5 - 10 bar
Power Supply: 230-240V, 50Hz
Energy Rating: A
Noise Level: 65 dB (washing), 75 dB (spinning)

Controls and Settings

Access settings via control panel. Main Controls: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS (e.g., Extra Rinse, Pre-wash).

Display: Shows time remaining, cycle stage, and selected options.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicates (cold-30°C), Quick Wash (30 min), Heavy Duty (for heavily soiled items). Options: Delay Start (1-24 hrs), Child Lock (press and hold for 3 sec), Spin Speed Reduction, Rinse Hold. Settings: Temperature selection, spin speed adjustment, load sensing on/off.

Connecting Water Supply

Inlet: Hot and cold water connections (if model supports). Drain: Hose to standpipe or sink.

Turn off taps before connecting hoses.
Connect inlet hoses to machine and taps; tighten by hand then a quarter turn with pliers.
Place drain hose in standpipe (max height 100 cm) or over sink edge; secure with hook.
Check for leaks by turning on taps briefly before first wash.

Tip: Use only provided hoses; do not reuse old hoses.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open lid, place items loosely in drum; do not overload.
Add detergent: Pour into dispenser drawer (main wash, pre-wash, softener compartments).
Select program: Turn selector to desired cycle (e.g., Cotton for towels).
Set options: Press buttons for Extra Rinse, Delay Start, etc.
Start: Press START/PAUSE; machine will begin filling.
Pause/change: Press START/PAUSE to stop; wait for door lock to release before opening.
End of cycle: Signal sounds; remove laundry promptly to avoid wrinkles.

WARNING! Do not open lid during spin cycle. Balance load to prevent excessive vibration.

Special Functions

Delay Start: Set 1-24 hours for delayed start. Child Lock: Enable to lock controls during cycle. Load Sensing: Automatically adjusts water and time based on load weight. Rinse Hold: Pauses with water in drum for hand rinsing; press START/PAUSE to drain and spin.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run maintenance wash every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Copyright © 2025 Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +44 (0) 333 000 0333.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/lid	Check plug and power; ensure lid is closed properly.
No water intake	Taps/hoses	Ensure taps are on; check hoses for kinks; clean inlet filter.
Excessive vibration	Leveling/load	Re-level machine; redistribute load evenly.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter.
Error codes displayed	Various faults	Refer to manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 5 minutes to reset electronic control.

Service: +44 (0) 333 000 0333; www.hotpoint.eu