Hotpoint Washing Machine VBSR2080WWW Manual

The Hotpoint VBSR2080WWW is a 2.0 cubic foot top-load washing machine with 8 wash cycles, 5 wash/rinse temperature combinations, 3 spin speed options, and a durable stainless steel wash basket. It features an automatic water level sensor, a deep fill option, a delay start timer, and a self-cleaning lint filter. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Lid, Agitator, Stainless Steel Wash Basket, Lint Filter, Water Inlet Hoses, Drain Hose, Leveling Legs.

Feature	Description
Control Panel	Digital display with cycle selection buttons
8 Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Rinse & Spin, Drain & Spin, Soak
Water Temperature Options	5 combinations (Hot/Cold, Warm/Cold, Cold/Cold, etc.)
Spin Speed Options	3 settings (High, Medium, Low)
Automatic Water Level Sensor	Adjusts water usage based on load size
Deep Fill Option	Manual override for extra water
Delay Start Timer	Delays cycle start up to 24 hours
Self-Cleaning Lint Filter	Integrated filter system
Stainless Steel Basket	Durable, rust-resistant wash tub
Lid Lock	Safety feature during spin cycle

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove shipping materials: Remove transit bolts and packing from rear.
Connect water supply: Attach hot and cold water hoses to faucets and machine inlet valves.
Connect drain hose: Place hose into standpipe or laundry tub.
Level the machine: Adjust front leveling legs to prevent vibration.
Plug into grounded 120V AC outlet.

WARNING! Machine is heavy; use two people for moving. Ensure all connections are secure and leak-free.

First-Time Setup

Power on machine; run initial test cycle.

Check water connections: Turn on water faucets fully.
Run clean cycle: Select Normal cycle with hot water, add 1 cup of bleach, run empty cycle.
Set preferences: Use CONTROL LOCK if needed; set default spin speed.
Load laundry: Do not overload; follow load size guidelines.

CAUTION! Ensure machine is level and stable before first use.

Specifications

Capacity: 2.0 cubic feet.
Dimensions (HxWxD): 43" x 27" x 27".
Voltage: 120V AC, 60Hz.
Water Connections: Hot & Cold water inlet hoses (included).
Max Spin Speed: 700 RPM.
Cycle Time Range: 15 minutes (Quick Wash) to 60 minutes (Heavy Duty).
Warranty: 1-year limited parts and labor.
Weight: 125 lbs.

Controls and Settings

Access settings via control panel buttons and dial.

Control Panel: POWER, CYCLE SELECTOR KNOB, TEMPERATURE, SPIN SPEED, OPTIONS (Deep Fill, Delay Start), START/PAUSE.

Cycle Selection: Turn knob to desired cycle. Temperature: Select from 5 combinations. Spin Speed: High, Medium, Low, or No Spin. Options: Deep Fill for extra water; Delay Start (1-24 hrs). Special: CONTROL LOCK to prevent changes; SUDS SENSE to detect over-sudsing.

Connecting Water Supply

Hot and Cold water required for full functionality.

Turn off water faucets before connecting hoses.
Connect hoses: Hand-tighten inlet hoses to machine and faucets.
Check for leaks: Turn on water slowly; inspect connections.
Drain hose: Secure in standpipe (max height 96 inches).

Tip: Use only new hoses; replace every 5 years.

Using Wash Cycles

Supports various fabrics and soil levels.

Load laundry: Sort by color and fabric type; do not exceed basket rim.
Add detergent: Use HE detergent; follow manufacturer's instructions.
Select cycle: Turn knob (e.g., Normal for cottons, Delicates for gentle wash).
Select options: Set temperature, spin speed, Deep Fill if needed.
Start: Press START/PAUSE; lid will lock during cycle.
Pause/Stop: Press START/PAUSE to pause; turn knob to OFF to cancel.
Unload: Wait for lid unlock signal; remove laundry promptly.

WARNING! Do not open lid during spin cycle. Keep children away from operating machine.

Special Features

Deep Fill: Manual override for maximum water level. Delay Start: Program start time. CONTROL LOCK: Disables panel buttons. SUDS SENSE: Automatically adjusts rinse if excess suds detected.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean lint filter monthly. Run clean cycle monthly with washer cleaner or bleach.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/lid	Ensure plugged in; close lid securely; press START.
No water filling	Water supply/hoses	Check faucets are on; inspect hoses for kinks; ensure inlet filters clean.
Excessive vibration/noise	Leveling/load	Level machine; redistribute load; remove shipping bolts.
Water leaks	Hose connections	Tighten hose connections; check drain hose position.
Clothes too wet after spin	Spin speed/load	Select higher spin speed; do not overload; check drain pump filter.
Error codes displayed	Various faults	Refer to manual error code chart; unplug for 5 minutes, then retry.

Reset: Unplug for 1 minute to reset control board.

Service: 1-800-432-2737; www.hotpoint.com