Hotpoint washing machine RSSF 624 W IT N manual

The Hotpoint RSSF 624 W IT N is a freestanding washing machine with a 6 kg load capacity, A+++ energy rating, 1200 rpm spin speed, and multiple wash programs. It features a digital display, delay timer, child lock, and various fabric-specific cycles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, detergent dispenser, drum, water inlet valves, drain pump, adjustable feet.

Feature	Description
Capacity	6 kg maximum load
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1200 rpm
Display	Digital display with time remaining
Programs	Multiple including Cotton, Synthetics, Delicates, Quick Wash
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Door Lock	Automatic during operation
Detergent Dispenser	Compartments for pre-wash, main wash, softener
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using wrench; ensure machine is stable.
Plug into AC power.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on machine; follow initial setup steps.

Run a maintenance wash: Select Cotton program at 90°C without laundry to clean drum.
Set language: If available in settings, select preferred language.
Test operation: Run a short cycle to check for leaks or unusual noises.
Familiarize with controls: Review program selector and options.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: RSSF 624 W IT N
Capacity: 6 kg
Energy Class: A+++
Spin Speed: 1200 rpm
Water Pressure: 0.5 - 8 bar
Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, Rinse & Spin, Drain
Dimensions (HxWxD): 85 x 60 x 55 cm
Power Supply: 230V AC, 50Hz
Noise Level: Wash: 59 dB, Spin: 77 dB
Weight: 65 kg

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Option buttons (Delay, Spin Speed, Temperature), Display.

Programs: Cotton (40°C-90°C), Synthetics (40°C-60°C), Delicates (30°C), Wool, Quick Wash (30°C), Rinse & Spin, Drain.

Options: Delay Start (1-24 hours), Spin Speed (400-1200 rpm, Rinse Hold), Temperature (Cold to 90°C), Extra Rinse. Settings: Child Lock (press buttons simultaneously for 3 seconds), Door Lock (automatic).

Connecting Water Supply

Cold water inlet: Connect hose to cold tap. Hot water (optional): Connect if machine supports. Drain: Place hose in standpipe (max height 100 cm).

Turn off water taps before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Ensure drain hose is not kinked or submerged.
Check for leaks after connections.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Use dispenser compartments as directed.
Select program: Turn knob to desired program.
Adjust options: Set temperature, spin speed, delay if needed.
Start: Press Start/Pause; door locks automatically.
Pause/Stop: Press Start/Pause to pause; turn knob to reset.
End of cycle: Door unlocks; remove laundry promptly.

WARNING! Do not open door during spin cycle. Check pockets for objects.

Special Functions

Delay Start: Set delay up to 24 hours. Child Lock: Prevents changes during operation. Extra Rinse: Adds rinse cycle for sensitive skin. Rinse Hold: Stops with water in drum for easy hand washing.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run maintenance wash every 2 months (90°C without laundry). Clean drain pump filter periodically.

CAUTION! Do not use abrasive cleaners. Keep ventilation openings clear.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug; ensure door closed properly; press Start.
No water intake	Taps/hoses	Ensure taps on; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Leaking water	Hoses/connections	Tighten connections; check hose seals; replace if damaged.
Unusual noise	Foreign objects	Check drum for coins, buttons; clean pump filter.
Display shows error code	Various faults	Refer to error code list in manual; reset by unplugging.

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service; www.hotpoint.eu