Hotpoint washing machine RSG 845 JGX UK manual

The Hotpoint RSG 845 JGX is a freestanding washing machine with an 8kg capacity, 1400 RPM spin speed, A+++ energy rating, and multiple wash programs. It features electronic controls, a digital display, delay start, child lock, and anti-flood protection. Designed for UK households, it operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, detergent dispenser, drum, filter, inlet hoses, drain hose, adjustable feet, and power cord.

Feature	Description
Capacity	8kg load capacity for family washing
Spin Speed	Up to 1400 RPM for efficient drying
Energy Rating	A+++ for low energy consumption
Programs	15 wash programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Digital Display	Shows time remaining, cycle stage, and settings
Anti-Flood Protection	AquaStop feature for leak prevention
Adjustable Feet	For leveling on uneven floors
Detergent Dispenser	Compartments for pre-wash, main wash, and fabric softener

Installation

Unpack and inspect contents. Place on stable, level floor near water and drain points.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot and cold taps (if applicable); ensure washers are fitted.
Connect drain hose: Place into standpipe or sink; use hook provided.
Level the machine: Adjust feet using spanner; check with spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; run initial empty wash cycle.

Set language: Press and hold START/PAUSE and TEMP buttons for 3 seconds to select English.
Load detergent: Add small amount to dispenser drawer.
Select program: Turn knob to "Cotton 60°C".
Start cycle: Press START/PAUSE to begin; this cleans drum and removes residues.
Set child lock: Press and hold CHILD LOCK button for 3 seconds if required.

CAUTION! Ensure machine is level and hoses are secure to prevent leaks or vibration.

Specifications

Model: RSG 845 JGX.
Capacity: 8kg.
Spin Speed: 1400 RPM (adjustable).
Energy Class: A+++.
Water Pressure: 0.5 - 10 bar.
Programs: 15 including Eco, Wool, Hand Wash, Spin Only.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Noise Level: 53 dB (wash), 73 dB (spin).
Weight: 70kg.

Controls and Settings

Control Panel: Program knob, digital display, temperature button, spin speed button, option buttons (Delay, Pre-wash, Extra Rinse), START/PAUSE, and CHILD LOCK.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics, Delicates). Temperature: Press TEMP to select 30°C-90°C or cold. Spin Speed: Press SPIN to select 400-1400 RPM or No Spin. Options: Delay Start (1-24h), Pre-wash for heavily soiled loads, Extra Rinse for sensitive skin. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Inlet: Connect hoses to taps (blue for cold, red for hot if using both). Drain: Place hose securely into standpipe (max height 100cm).

Ensure taps are off before connecting hoses.
Check hose condition; replace if cracked.
Secure drain hose to prevent slipping.
After connection, open taps fully and check for leaks.

Tip: Use only genuine Hotpoint hoses; do not overtighten connections.

Using Wash Programs

Supports various fabrics and soil levels.

Sort laundry: Separate by colour and fabric type.
Load machine: Do not exceed 8kg; distribute evenly.
Add detergent: Use drawer compartments as per instructions.
Select program: Turn knob (e.g., Cotton for cottons, Synthetics for blends).
Adjust settings: Set temperature, spin speed, and options.
Start: Press START/PAUSE; display shows time remaining.
Pause/change: Press START/PAUSE to pause; turn knob to change program (if allowed).
End of cycle: Machine beeps; remove laundry promptly to avoid creasing.

WARNING! Do not overload; check pockets for objects. Use correct detergent type (powder/liquid).

Safety Features

Child Lock: Disables controls when activated. Door Lock: Door locks during cycle; unlocks at end or when paused. Anti-Flood: AquaStop detects leaks and stops water supply. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run drum clean cycle every 30 washes. Check filter every 3 months for blockages.

CAUTION! Do not use abrasive cleaners; wipe exterior with damp cloth only. Keep area around machine dry.

Regulatory Information

Complies with UK Electrical Equipment Safety Regulations 2016. CE marked. Waste Electrical and Electronic Equipment (WEEE) Directive: Do not dispose with household waste; recycle appropriately. For support, visit www.hotpoint.co.uk or contact 03448 113 113.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug socket; ensure child lock off; close door properly.
No water intake	Taps/hoses/filter	Open taps; check hoses for kinks; clean inlet filter.
Excessive vibration	Transit bolts/level/load	Ensure transit bolts removed; level machine; redistribute load.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter.
Error codes (e.g., F01)	Fault detected	Consult manual; unplug for 5 minutes; if persists, call service.

Reset: Unplug for 5 minutes, then restart.

Service: 03448 113 113; www.hotpoint.co.uk